How to reset or factory restore Wiko Ufeel fab device?
There are a few ways to reset or factory restore a Wiko Ufeel fab device, but the two most common and recommended methods are:
Method 1: Using the "Fast Boot" command
1. Open a command prompt on your computer. If you are using a Windows PC, you can do this by pressing the Windows key + R, then type "cmd" and press Enter.
2. Connect your Wiko Ufeel fab device to your computer using a USB cable.
3. Once your device is connected, enter the following command in the command prompt: "fastboot reboot bootloader"
4. This will reboot your device into the bootloader mode, which will allow you to access the recovery options.
5. In the bootloader mode, select "Recovery" by scrolling through the options until you find it, then press the Volume Up or Volume Down button to select it.
6. Once you are in the recovery menu, select "Wipe data/factory reset" by scrolling through the options until you find it, then press the Volume Up or Volume Down button to select it.
7. Confirm the reset by selecting "Yes -- erase user data" on the next screen.
8. Once the data has been wiped, select "Reboot system" to restart your device.
Method 2: Using the "Bootloader" command
1. Open a command prompt on your computer. If you are using a Windows PC, you can do this by pressing the Windows key + R, then type "cmd" and press Enter.
2. Connect your Wiko Ufeel fab device to your computer using a USB cable.
3. Once your device is connected, enter the following command in the command prompt: "adb reboot bootloader"
4. This will reboot your device into the bootloader mode, which will allow you to access the recovery options.
5. In the bootloader mode, select "Recovery" by scrolling through the options until you find it, then press the Volume Up or Volume Down button to select it.
6. Once you are in the recovery menu, select "Wipe data/factory reset" by scrolling through the options until you find it, then press the Volume Up or Volume Down button to select it.
7. Confirm the reset by selecting "Yes -- erase user data" on the next screen.
8. Once the data has been wiped, select "Reboot system" to restart your device.
Note: Both of these methods require a computer with the "adb" tool installed, which is included with the Android SDK. You may need to download and install the SDK if you do not already have it. Additionally, it is important to back up any important data on your device before resetting it, as all data will be lost when you reset the device.
