Wiko Rainbow 4G

Home/ Wiko/ Phones/ Rainbow 4G

Table of Contents

Summary

Wiko Rainbow 4G Price

At the time of it's release in 2014, November, the manufacturer's retail price for a new Wiko Rainbow 4G was about 160 EUR.

The retail price of a new or used/second hand Wiko Rainbow 4G varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Wiko Rainbow 4G across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of the Wiko Rainbow 4G?

The Wiko Rainbow 4G has a 2000 mAh battery.

What is the display size of the Wiko Rainbow 4G?

The Wiko Rainbow 4G has a 5.0 inch display.

How to reset or factory restore Wiko Rainbow 4G device?

The Wiko Rainbow 4G is an older smartphone that may not be getting software updates or security patches anymore. If you are having trouble with your device, a factory reset or soft reset may be necessary to get it back to functioning correctly. There are two main ways to perform a factory reset on a Wiko Rainbow 4G: 1. Using the recovery menu: To perform a factory reset using the recovery menu, follow these steps: * Turn off your Wiko Rainbow 4G. * Press and hold the Volume Up button at the same time as the Power button until the recovery menu appears. * Use the Volume Up and Down buttons to navigate to "Factory Data Reset". * Use the Volume Up button to select "Yes - Reboot system now". * Wait for the device to reset and reboot. 2. Using a computer: To perform a factory reset using a computer, you'll need to have the Wiko Rainbow 4G drivers installed on your computer and a USB cable. Follow these steps: * Turn off your Wiko Rainbow 4G. * Connect the USB cable to the computer and to your phone. * Open the Wiko Rainbow 4G drivers on your computer. * Go to the "Device Manager" on your computer and find the Wiko Rainbow 4G device. * Right-click on the device and select "Update driver". * In the "Update driver" dialog box, select "Browse my computer" and navigate to the folder where the updated drivers for your device are located (usually under "C:\Driver\Wiko\"). * Select the drivers and click "Next". * Follow the prompts to install the drivers on your computer and phone. * Open a command prompt on your computer and navigate to the folder where the Wiko Rainbow 4G MFRTool is located (usually under "C:\Usb\Device_MFRTool"). * Run the command "factorydatareset.bat". This will launch a factory reset menu on your phone. * Follow the instructions in the factory reset menu to perform the reset. It's important to note that a factory reset will erase all data on your phone, so be sure to back up any important data before performing the reset. Also, a factory reset is irreversible, so make sure you only do it when absolutely necessary.

What type of SIM card does the Wiko Rainbow 4G use?

The Wiko Rainbow 4G uses a Micro SIM card.

Specifications

Network

Technology: GSM / HSPA / LTE
2G bands: GSM 850 / 900 / 1800 / 1900
3G bands: HSDPA 900 / 1900 / 2100
4G bands: 3, 7, 20
Speed: HSPA 21.1/5.76 Mbps, LTE Cat4 150/50 Mbps