Wiko Pulp Fab

Home/ Wiko/ Phones/ Pulp Fab

Table of Contents

Summary

Wiko Pulp Fab Price

The retail price of a new or used/second hand Wiko Pulp Fab varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Wiko Pulp Fab across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of the Wiko Pulp Fab?

The Wiko Pulp Fab has a battery capacity of 3000 mAh

What is the display size of the Wiko Pulp Fab?

The Wiko Pulp Fab has a 5.45 inch display

How to reset or factory restore Wiko Pulp Fab device?

There are several ways to reset or factory restore a Wiko Pulp Fab device, depending on your personal preference and situation. Here are the most common and recommended methods: Method 1: Using the recovery menu 1. Turn off your Wiko Pulp Fab device. 2. Press and hold the Volume Up and Power buttons simultaneously until you feel a vibration. 3. Release both buttons and wait for the Wiko device to boot into recovery mode. 4. In the recovery menu, navigate to "Factory Data Reset" option and select it. 5. You might need to enter your PIN or pattern to proceed further. 6. Once the reset is complete, you will need to reset your PIN or pattern to complete the setup process. Method 2: Using a computer 1. Connect your Wiko Pulp Fab device to your computer using a USB cable. 2. Download the appropriate drivers and software from the Wiko website. 3. Launch the software and select the "flash ROM" option. 4. Follow the instructions on your device to enter recovery mode. 5. In the recovery menu, select "Current firmware is already installed" and select the "Install Firmware directly" option. 6. Select the recovery firmware from your computer and wait for it to fill up your device. 7. Once the firmware is installed, reboot your device. 8. Enter the backup code when asked to reset your device. Method 3: Using over-the-air update 1. Go to About phone > System Update > Check for system updates on your Wiko Pulp Fab device. 2. If an update is available, download and install it. This will erase your device's data and settings. 3. Follow the on-screen instructions to complete the update. 4. Once the update is complete, your device will be reset to its factory settings. Note: Before resetting your Wiko Pulp Fab device, make sure to backup all your important data, as this process will erase all your data and settings.

What is the operating system of the Wiko Pulp Fab?

The Wiko Pulp Fab runs on Android 8.1 Oreo

Specifications

Network

Technology: GSM / HSPA
2G bands: GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
3G bands: HSDPA 900 / 1900 / 2100
Speed: HSPA 21.1/5.76 Mbps

Launch

Announced: 2015, October. Released 2015, October
Status: Discontinued

Body

Dimensions: 154.7 x 79.3 x 8.5 mm (6.09 x 3.12 x 0.33 in)
Weight: 170 g (6.00 oz)
SIM: Dual SIM (Micro-SIM, dual stand-by)

Display

Type: IPS LCD
Size: 5.5 inches, 83.4 cm2 (~68.0% screen-to-body ratio)
Resolution: 720 x 1280 pixels, 16:9 ratio (~267 ppi density)

Platform

OS: Android 5.1 (Lollipop)
Chipset: Mediatek MT6592M (28 nm)
CPU: Octa-core 1.4 GHz Cortex-A7
GPU: Mali-450MP4

Memory

Card slot: microSDXC
Internal: 16GB 2GB RAM

Main Camera

Single: 13 MP, AF
Features: LED flash, panorama, HDR
Video: 1080p@30fps

Selfie camera

Single: 5 MP
Features: LED flash
Video:

Sound

Loudspeaker: Yes, with stereo speakers
3.5mm jack: Yes

Comms

WLAN: Wi-Fi 802.11 b/g/n, Wi-Fi Direct, hotspot
Bluetooth: 4.0, A2DP
Positioning: GPS
NFC: No
Radio: FM radio
USB: microUSB 2.0, OTG