Wiko Highway 4G

Home/ Wiko/ Phones/ Highway 4G

Table of Contents

Summary

Wiko Highway 4G Price

At the time of it's release in 2014, October, the manufacturer's retail price for a new Wiko Highway 4G was about 300 EUR.

The retail price of a new or used/second hand Wiko Highway 4G varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Wiko Highway 4G across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore Wiko Highway 4G device?

Here are the most common and recommended ways to reset or factory restore a Wiko Highway 4G device: Method 1: Using the back button and power button 1. Turn off the device by pressing and holding the power button. 2. Release the power button and press and hold the back button. 3. Hold the back button until the logo appears on the screen. 4. Then, release the back button and then press and hold the power button again. 5. Release the power button and then press and hold the back button again. 6. Hold the back button until the word "Wipe data/factory reset" appears on the screen. 7. Then, press the volume down button to highlight "Yes -- Delete all user data". 8. Release all the buttons and then press and hold the power button again. 9. Release the power button and then press and hold the back button again. 10. When the logo appears, release the back button and then press and hold the power button again. 11. Release the power button and then press and hold the back button again. 12. Finally, press the volume up button to confirm the factory reset. Method 2: Using the Wiko Factory Reset App 1. Download and install the Wiko Factory Reset App from the Google Play Store. 2. Open the app and enter your PIN or pattern to unlock it. 3. Tap on the "Factory Reset" option. 4. Confirm by clicking on "Yes". 5. Wait for the device to reset to its factory settings. Method 3: Using USB Debugging and Recovery Manager 1. Connect the device to your computer using a USB cable. 2. Enable USB Debugging on your device by going to Developer Options and then Enabled USB Debugging. 3. Open Recovery Manager on your computer and then connect your device to the computer. 4. Select "Install". 5. Scroll down and select "Factory reset". 6. Select "Yes -- Delete all user data". 7. Wait for the device to reset to its factory settings. Note: Before resetting your Wiko Highway 4G device, make sure to backup all your important data to prevent data loss. Additionally, it is recommended to reset the device only if there are software issues or hacking attempts.

What is the battery capacity of the Wiko Highway 4G?

The Wiko Highway 4G has a 2000 mAh battery.

What is the display size of the Wiko Highway 4G?

The Wiko Highway 4G has a 5.0 inch display.

What type of SIM card does the Wiko Highway 4G use?

The Wiko Highway 4G uses a Micro SIM card.

Specifications

Network

Technology: GSM / HSPA / LTE
2G bands: GSM 850 / 900 / 1800 / 1900
3G bands: HSDPA 900 / 1900 / 2100
4G bands: 3, 7, 20
Speed: HSPA 21.1/5.76 Mbps, LTE Cat4 150/50 Mbps

Launch

Announced: 2014, May. Released 2014, October
Status: Discontinued

Body

Dimensions: 144 x 70 x 7.3 mm (5.67 x 2.76 x 0.29 in)
Weight: 143 g (5.04 oz)
SIM: Micro-SIM

Display

Type: IPS LCD
Size: 5.0 inches, 68.9 cm2 (~68.4% screen-to-body ratio)
Resolution: 1080 x 1920 pixels, 16:9 ratio (~441 ppi density)
Protection: Dual Corning Gorilla Glass 2