How to reset or factory restore vivo Y52s t1 device?
Sure, I can guide you through the process of resetting or factory restoring a Vivo Y52s T1 device. Here are the most common and recommended methods:
Method 1: Using Recovery Mode
Step 1: Enable Developer Options:
1. Go to Settings > About phone.
2. Scroll down to the bottom and tap "Build number" 7-10 times.
3. The Developer Options will appear.
Step 2: Enable USB debugging:
1. Go to Settings > Developer Options.
2. Scroll down to “USB debugging” and turn it on.
Step 3: Connect the phone to your computer and open a command prompt.
Step 4: Reboot the phone in recovery mode:
1. Press and hold the Volume down button and the Power button at the same time until the ‘Vivo’ logo appears.
2. Release both buttons and press the Volume down button until the ‘Recover system’ option appears.
Step 5: Delete all user data and cache:
1. In recovery mode, head to “Wipe data/factory data reset” and tap OK.
2. Then tap “Yes – delete all user data” to proceed.
Step 6: Reboot the phone:
1. In recovery mode, head to "Reboot system" and tap OK.
Method 2: Using Hard reset
Hard reset is a risky method that can reset all user data, settings, and even SIM card information. Before proceeding with a hard reset, make sure to back up your data to an external storage or a cloud service.
Step 1: Enable Developer Options:
1. Go to Settings > About phone.
2. Scroll down to the bottom and tap "Build number" 7-10 times.
3. The Developer Options will appear.
Step 2: Enable USB debugging:
1. Go to Settings > Developer Options.
2. Scroll down to “USB debugging” and turn it on.
Step 3: Connect the phone to your computer and open a command prompt.
Step 4: Reboot the phone to bootloader:
1. Press and hold the Volume down button and the Power button at the same time.
Step 5: Enter the bootloader by sending the command to the Command prompt:
1. Open the Command prompt on your computer and enter the following command:
* fastboot bootloader
2. Reboot the phone by sending the command:
* fastboot reboot bootloader
Step 6: Enter the bootloader password:
If your phone has a bootloader password, you will need to enter it in the bootloader.
Step 7: Enter recovery mode:
1. In the bootloader menu, select “Recovery” and press OK.
Step 8: Delete all user data:
1. In recovery mode, head to “Wipe data/factory data reset” and tap OK.
2. Then tap “Yes – delete all user data” to proceed.
Step 9: Reboot the phone:
1. In recovery mode, head to "Reboot system" and tap OK.
I hope this helps you reset your Vivo Y52s T1 device. Let me know if you have any questions or if there's anything else I can assist you with.
