How to reset or factory restore vivo Y21e device?
Sure, here are the most common and recommended ways to reset or factory restore a Vivo Y21e device:
方法1：使用物理按键重启设备
1. Turn off the device.
2. Press and hold the Power button and the Volume Up button simultaneously for about 10 seconds, until the device restarts.
3. Release the buttons when the Vivo logo appears on the screen.
4. Use the Volume keys to navigate through the options and select "Wipe data/factory data".
5. Use the Volume keys to confirm and select "Yes".
6. The device will begin the factory data reset process.
方法2：使用isenbox可重启设备
1. Connect the Vivo Y21e device to your computer using a USB cable.
2. Download and install the Vivo PC Suite on your computer.
3. Launch the Vivo PC Suite and connect your device to your computer.
4. Click on your device's name in the left-hand menu of the Vivo PC Suite.
5. Click on the "Repair" tab.
6. Select "Repair firmware" from the dropdown menu.
7. Follow the on-screen instructions to complete the firmware repair process.
8. After the firmware repair process is complete, select "Quick start" from the main menu of the Vivo PC Suite.
9. This will restart the device into the fastboot mode.
10. Connect the device to your computer again and launch the Vivo PC Suite.
11. Click on your device's name in the left-hand menu of the Vivo PC Suite.
12. Click on the "Firmware" tab.
13. Select "Flash DPUI image" from the dropdown menu.
14. Select the firmware image file you downloaded earlier and follow the on-screen instructions to flash the image.
15. After the firmware flashing process is complete, select "Quick start" from the main menu of the Vivo PC Suite.
16. This will restart the device into the fastboot mode.
17. Connect the device to your computer again and launch the Vivo PC Suite.
18. Click on your device's name in the left-hand menu of the Vivo PC Suite.
19. Click on the "Firmware" tab.
20. Select "Flash stock ROM" from the dropdown menu.
21. Select the stock ROM image file you downloaded earlier and follow the on-screen instructions to flash the image.
22. After the firmware flashing process is complete, select "Quick start" from the main menu of the Vivo PC Suite.
23. This will restart the device into the normal mode.
方法3：使用isenbox进行软件更新
1. Connect the Vivo Y21e device to your computer using a USB cable.
2. Download and install the Vivo PC Suite on your computer.
3. Launch the Vivo PC Suite and connect your device to your computer.
4. Click on your device's name in the left-hand menu of the Vivo PC Suite.
5. Click on the "Firmware" tab.
6. Select "Check for firmware update" from the dropdown menu.
7. If an update is available, follow the on-screen instructions to complete the update process.
8. After the update process is complete, select "Quick start" from the main menu of the Vivo PC Suite.
9. This will restart the device into the normal mode.
注意：arium recovery
1. Connect the Vivo Y21e device to your computer using a USB cable.
2. Download and install the Vivo PC Suite on your computer.
3. Launch the Vivo PC Suite and connect your device to your computer.
4. Click on your device's name in the left-hand menu of the Vivo PC Suite.
5. Click on the "Firmware" tab.
6. Select "Get firmware recovery from SPD" from the dropdown menu.
7. Follow the on-screen instructions to complete the firmware recovery process.
8. After the firmware recovery process is complete, select "Quick start" from the main menu of the Vivo PC Suite.
9. This will restart the device into the normal mode.
лове😄
