vivo S1 (China)

Home/ vivo/ Phones/ S1 (China)

Table of Contents

Summary

vivo S1 (China) Price

The retail price of a new or used/second hand vivo S1 (China) varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of vivo S1 (China) across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Vivo S1 (China)?

Vivo S1 (China) has a 4500 mAh battery

How to reset or factory restore vivo S1 (China) device?

To reset or factory restore a Vivo S1 (China) device, there are two main methods you can use: Method 1: Using the recovery menu 1. Turn off your device by holding down the power button until it shuts down completely. 2. Press and hold the power button and the volume up button at the same time until the recovery menu appears. You may need to release the buttons and try again if the menu doesn't show up. 3. Once in the recovery menu, select "Factory Data Reset" using the volume keys. 4. Confirm the reset by selecting "Yes - Delete all user data/factory reset" on the next screen. 5. Wait for the device to reset, which may take several minutes. 6. Once the reset is complete, select "Reboot system" on the recovery menu and then press and hold the power button until the device shuts down and turns back on. Method 2: Using a computer and USB cable 1. Connect your device to a computer using a USB cable. 2. Download the Vivo S1 firmware file from a trusted source. 3. Open a command prompt on your computer and navigate to the folder where the firmware file is located. 4. Run the following command to check for updates: ```python fastboot devices ``` If your device is listed, proceed to the next step. If not, make sure the USB cable is properly connected and try again. 5. Run the following command to flash the firmware file: ```python fastboot flash firmware firmware.img ``` Replace "firmware.img" with the actual name of your firmware file. 6. Wait for the device to flash the firmware. This may take several minutes. 7. Once the flashing is complete, disconnect your device from the computer and press and hold the power button until the device shuts down and turns back on. Note: Before resetting your Vivo S1 device, make sure to back up any important data to a safe location. Resetting your device will erase all user data and restore the device to its original factory settings.