verykool s5019 Wave

Home/ verykool/ Phones/ s5019 Wave

Table of Contents

Summary

verykool s5019 Wave Price

The retail price of a new or used/second hand verykool s5019 Wave varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of verykool s5019 Wave across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of the Verykool S4008 Leo V?

The Verykool S4008 Leo V has a battery capacity of 2000 mAh

What type of processor does the Verykool S4008 Leo V have?

The Verykool S4008 Leo V has a Quad-Core 1.3GHz processor

How to reset or factory restore verykool s5019 Wave device?

To reset or factory restore a Verykool S5019 Wave, follow these steps: 1. Turn off the device: Press and hold the power button for 10 seconds until the device turns off. 2. Enter recovery mode: Press and hold the power button for 10 seconds, then release and immediately press the volume up button. Continue pressing the volume up button until the recovery screen appears. 3. Select "Wipe data/factory reset" option: Use the volume keys to highlight the "Wipe data/factory reset" option, then press the power button to select it. 4. Confirm the factory reset: On the next screen, you'll be prompted to confirm the factory reset. Press the volume down button to navigate to "Yes - delete all user data", then press the power button to select it. 5. Wait for the device to reset: The device will now begin resetting, which can take anywhere from 5 to 10 minutes. 6. Turn off the device: Once the reset is complete, the device will reboot automatically. Turn off the device by pressing and holding the power button for 10 seconds until it turns off. 7. Enter recovery mode again: Turn on the device and enter recovery mode by pressing and holding the power button for 10 seconds until the recovery screen appears. 8. Install the latest software update: Once in recovery mode, connect your device to your computer using a USB cable, and select "Update firmware". Follow the instructions on your computer to download and install the latest software update. 9. Reboot the device: Once the software update is complete, select "Reboot system now" in recovery mode to restart your device. It is important to note that resetting or factory restoring your device will erase all data, so make sure to back up any important files or else you will lose them forever. Also, before resetting or factory resetting your device, make sure to check with your warranty provider as resetting may void your warranty.