How to reset or factory restore verykool R27 device?
A Verykool R27 device can be reset or factory restored using the following methods:
Method 1: Reset using AirDroid Relay
1. Connect the Verykool R27 device to a Wi-Fi network and make sure it is turned on.
2. Install and log in to the AirDroid Relay app on your phone or computer.
3. From the AirDroid Relay app, connect to the Verykool R27 device by selecting it from the list of connected devices.
4. Once connected, tap the "Keep Connecting" button until the connection is similar.
5. After the connection is successful, select "Diagnostic" from the device menu.
6. In the diagnostic section, select "Clear Reset" and then select "Confirm".
7. Wait for the reset process to complete, which may take a few minutes.
8. After the reset is complete, turn off the Verykool R27 device and wait for it to turn back on.
9. Log back into the AirDroid Relay app and perform a full system restore.
Method 2: Reset using USB cable
1. Connect the Verykool R27 device to a computer using a USB cable.
2. Backup all important data from the device to a separate location, as this process will erase all data on the device.
3. Disable the AirDroid app on the Verykool R27 device.
4. Open up the command prompt on your computer and navigate to the directory where you have connected the USB cable.
5. Type the following command to ensure that the computer recognizes the USB device: "dism /online-enable"
6. Once the computer has recognized the USB device, type the following command to reset the device to its factory settings: "dism /get-wiminfo /online"
7. Press "A" on the Verykool R27 device to accept the terms of the license agreement.
8. Restart the Verykool R27 device and wait for it to turn back on.
9. Log back into the device and perform a full system restore.
Method 3: Reset using Recovery mode and factory recovery file
1. Connect the Verykool R27 device to a computer using a USB cable.
2. Backup all important data from the device to a separate location, as this process will erase all data on the device.
3. Disable the AirDroid app on the Verykool R27 device.
4. Open up the command prompt on your computer and navigate to the directory where you have connected the USB cable.
5. Type the following command to ensure that the computer recognizes the USB device: "dism /online-enable"
6. Once the computer has recognized the USB device, type the following command to check if there is a recovery image present on the device: "dism /get-images"
7. If there is a recovery image present, it will be listed in the "Image ID" column.
8. Write down the image ID and proceed to the next step.
9. Place the Verykool R27 device in recovery mode by powering off the phone and holding the Volume Down button and Power key simultaneously until the screen comes onto view.
10. Use the volume keys to highlight the "Recovery" option and press the Home button to select it.
11. Once you're in recovery mode, select "Install Recovery" and then select the recovery image you want to use.
12. Contact a seller or contacter the manufacturer of the device, and watch video to update the firmware.
13. Reboot the device multiple times to fix any bugs.
It
