verykool i725

Home/ verykool/ Phones/ i725

Table of Contents

Summary

verykool i725 Price

The retail price of a new or used/second hand verykool i725 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of verykool i725 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the Verykool i725?

The Verykool i725 has a battery life of up to 8 hours of talk time and up to 300 hours of standby time.

How to reset or factory restore verykool i725 device?

To reset or factory restore a verykool i725 device, here are the most common and recommended methods: Method 1: Using the physical Reset button 1. Turn off the device by holding the power button down until the device shuts down. 2. Press and hold the physical reset button on the back of the device. 3. Release the reset button and wait for the device to turn on. 4. Follow the on-screen instructions to set up the device as if it were new. Method 2: Using the Recovery mode and the Stock ROM 1. Connect the device to a computer using a USB cable. 2. Install the Verykool USB drivers on your computer. 3. Download the latest Stock ROM for your device from the internet. 4. Boot the device into Recovery mode by pressing and holding the power and volume down buttons together until the recovery menu appears. 5. Select "Install from SD card" and navigate to the location where you downloaded the Stock ROM. 6. Select the Stock ROM and swipe to install. 7. Reboot the device and follow the on-screen instructions to set up the device as if it were new. Method 3: Using the Stock Firmware and the recovery mode 1. Connect the device to a computer using a USB cable. 2. Install the Verykool USB drivers on your computer. 3. Download the latest Stock Firmware for your device from the internet. 4. Boot the device into recovery mode by pressing and holding the power and volume down buttons together until the recovery menu appears. 5. Select "Install from SD card" and navigate to the location where you downloaded the Stock Firmware. 6. Select the Stock Firmware and swipe to install. 7. Reboot the device and follow the on-screen instructions to set up the device as if it were new. Note: Before resetting or factory restoring your device, make sure you have a backup of all your important data, as this process will erase all data on the device.