How to reset or factory restore verykool i129 device?
Resetting or factory restoring a VERYKOOL i129 device involves wiping the device's data and restore it to its original configuration. This process can resolve various software issues and restore device performance to its initial state. Here are the most common and recommended ways to reset or factory restore a VERYKOOL i129 device:
Method 1: Using the "Soft Reset" Option
1. Turn off your VERYKOOL i129 device completely.
2. Press and hold the "Power" button and the "Volume Down" button simultaneously until the VERYKOOL logo appears on the screen.
3. Release both buttons and wait for the "Load Bootloader" message to appear.
4. Press and hold the "Volume Up" button until the menu options appear on the screen.
5. Scroll to "Soft Reset" and press the "OK" button to confirm the selection.
6. Wait for the device to reset, which may take several minutes.
7. Once the reset is complete, the device will restore to its factory settings.
Method 2: Using the "Hard Reset" Option
1. Turn off your VERYKOOL i129 device completely.
2. Press and hold the "Power" button and the "Volume Down" button simultaneously until the VERYKOOL logo appears on the screen.
3. Release both buttons and wait for the "Load Bootloader" message to appear.
4. Press and hold the "Back" button and the "Power" button simultaneously until the menu options appear on the screen.
5. Scroll to "Hard Reset" and press the "OK" button to confirm the selection.
6. Wait for the device to reset, which may take several minutes.
7. Once the reset is complete, the device will restore to its factory settings.
Method 3: Using a Computer and a USB Cable
1. Connect your VERYKOOL i129 device to a computer using a USB cable.
2. Install the "VERYKOOL Drivers" on your computer from the device manufacturer.
3. Open "Device Manager" on your computer and locate your VERYKOOL i129 device.
4. Right-click on the device and select "Properties".
5. Navigate to "Driver" and select "Uninstall Device".
6. Confirm the selection and wait for the device to uninstall.
7. Disconnect the USB cable from the computer.
8. Press and hold the "Power" button and the "Volume Down" button simultaneously until the VERYKOOL logo appears on the screen.
9. Release both buttons and wait for the "Load Bootloader" message to appear.
10. Connect your VERYKOOL i129 device to your computer again using the USB cable.
11. Install the updated drivers on your computer from the device manufacturer's website.
12. Open the "Recovery Software" on your computer and select "Flash" from the menu options.
13. Follow the on-screen instructions to flash the firmware onto your device.
14. Once the firmware is flashed, press and hold the "Volume Up" button until the menu options appear on the screen.
15. Scroll to "Reboot System" and press the "OK" button to confirm the selection.
16. Wait for the device to restore to its factory settings.
Note: Using a computer and a USB cable requires technical knowledge and may void the device's warranty. Therefore, it's recommended that you only use this method if you are familiar with the process and have experience with similar devices.
