How to reset or factory restore Unnecto Drone XL device?
Unnecto Drone XL is a sophisticated drone that is packed with advanced features and UI. However, due to various reasons such as software glitches, device malfunctioning, and accidental deletion of files, users may need to reset or factory restore their Unnecto Drone XL device. In this guide, we’ll walk you through the most common and recommended ways to reset or factory restore a Unnecto Drone XL device.
1. Reset Drone XL to Default Settings
Before performing a full factory reset, you may want to try resetting your device to its default settings. This will help you reset all customized settings and preferences. Here are the steps to reset the Unnecto Drone XL to default settings:
Step 1: Turn off the drone
Press and hold the power button until the LED light turns off.
Step 2: Press and hold the power button + volunteer button.
The LED light should turn on and off several times.
Step 3: Release the power button only.
The LED light will turn on for a few seconds, and then turn off.
Step 4: Press and hold the power button and volunteer button again.
Step 5: Release the power button once the LED light is on.
The LED light will remain on for several seconds, and then turn off once again. This process will repeat several times.
Step 6: Press and hold the power button and release the volunteer button.
The LED light will turn on and off several times.
Step 7: Release the power button.
The LED light will remain on for a few seconds, and then turn off. The drone will reset to its default settings.
1. Factory Reset the Device
If the above method did not work or if you want to completely erase all data on your device, you can perform a software update, which will essentially reset the device to its factory settings. Follow these steps:
Step 1: Update the device to the latest software version
Connect the drone to the charger and your computer using the USB cable.
Step 2: Open UnnectoDroneSoftware.com on your computer and download the latest software update.
Step 3: Connect your Unnecto drone to your computer using the USB cable.
Step 4: Install the software update on your computer.
Step 5: Run the software update on your computer.
Step 6: Disconnect your computer from your drone and your charger.
Step 7: Press and hold the power button.
Step 8: The LED light will turn on and off several times.
Step 9: Release the power button.
The drone will reset to its factory settings. The software update is essentially a soft reset that will erase all the data on the drone, including files and settings, leaving you with a new device. It is recommended to backup all your important data before performing a factory reset.
