Telit t130

Home/ Telit/ Phones/ t130

Table of Contents

Summary

Telit t130 Price

The retail price of a new or used/second hand Telit t130 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Telit t130 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of Telit t130?

The battery life of Telit t130 is up to 6 hours.

What type of SIM card does Telit t130 use?

Telit t130 uses a standard SIM card.

How to reset or factory restore Telit t130 device?

The Telit G20 t130 device is a touch screen POS (point of sale) device that can be used for a variety of tasks, including managing inventory, accepting payments, and printing receipts. When it's not functioning properly, it may be necessary to reset or factory restore the device in order to restore its functionality. Here are the most common and recommended ways to reset or factory restore a Telit t130 device: 1. Factory Reset Using the Back Button: This method is the most straightforward and does not require any additional equipment. Follow these steps: * Connect the device to a power source * Turn the power off and wait for a few seconds * Press and hold the back button (located at the top left corner of the screen) for at least 20 seconds until the device automatically shuts off * Wait for the device to turn back on and remain in a factory state mode (you will see the Telit logo) * Press the OK button (located to the right of the back button) to begin the factory reset process * Follow the on-screen instructions to complete the reset process. 2. Factory Reset Using the Computer: This method requires a computer and the latest version of the TouchStar V2 USB drivers. Follow these steps: * Connect the upper end of the device's USB cable to the computer * Connect the lower end of the device's USB cable to the device * Open Device Manager on the computer and locate the TouchStar t130 device * Right-click on the device and select "Update driver" * Browse to the location of the TouchStar V2 USB drivers and click "Next" to further install the drivers * When the drivers are installed, right-click on the device and select "Properties" * When the properties window appears, select "Human Interface Devices" and then "Use this device for CDC communications" * Click "OK" and allow the device to remain in a factory state mode * Press the OK button to begin the factory reset process * Follow the on-screen instructions to complete the reset process. 3. Factory Reset Using a Flash Light: This method involves the use of a flashlight and a laser pointer or red LED. Follow these steps: * Connect the device to a power source * Turn the power off and wait for a few seconds * Press and hold the back button (located at the top left corner of the screen) for at least 20 seconds until the device automatically shuts off * Wait for the device to turn back on and remain in a factory state mode (you will see the Telit logo) * Hold the flashlight over the device's touch screen, making sure the light is focused on the bottom left corner of the screen * Spin the laser pointer or red LED on full power so it touches the device's room axis * Pair the laser pointer or red LED with the Telit device (pairing instructions can

What is the maximum storage capacity of Telit t130?

The maximum storage capacity of Telit t130 is 8 GB.

Specifications

Network

Technology: GSM
2G bands: GSM 900 / 1800
GPRS: No
EDGE: No

Launch

Announced: 2006, Q2
Status: Discontinued

Body

Dimensions: 101 x 44 x 16.5 mm (3.98 x 1.73 x 0.65 in)
Weight: 75 g (2.65 oz)
SIM: Mini-SIM

Display

Type: Monochrome graphics
Size: 1.37 inches, 5.6 cm2 (~12.6% screen-to-body ratio)
Resolution: 96 x 64 pixels, 3:2 ratio (~84 ppi density)