How to reset or factory restore Telit G90 device?
The Telit G90 is a device that runs on the Telit IoT Platform. It is a modular device that can be customized for different IoT applications. There are several ways to reset or factory restore a Telit G90 device, and the most common and recommended methods are listed below.
1. Hardware Reset:
This method involves physically disconnecting the Telit G90 device from the network and resetting the device to its default settings. To do this, follow these steps:
a. Disconnect the device from the network
b. Press and hold the power button for 10 seconds
c. Release the power button
d. Wait for the device to reboot
e. Connect the device back to the network and verify the device has reset to its default settings
Note: This method will erase all data on the device, including configuration settings, so it is recommended for devices that are not in use and need to be reset to their default settings.
2. Remote Reset:
This method involves using the Telit IoT Platform to reset the Telit G90 device remotely. To do this, follow these steps:
a. Log in to the Telit IoT Platform
b. Navigate to the device you want to reset
c. Click on the "Remote" tab
d. Click on the "Reset Device" button
e. Wait for the device to reset to its default settings
Note: This method can be used to reset the device to its default settings, but it does not erase all data on the device. Therefore, it is a more secure method than the hardware reset method.
3. Configuration Update:
This method involves updating the firmware on the Telit G90 device to its default settings. To do this, follow these steps:
a. Log in to the Telit IoT Platform
b. Navigate to the device you want to reset
c. Click on the "Configuration" tab
d. Scroll down to the "Firmware" section
e. Click on the "Update" button
f. Wait for the device to update to its default settings
Note: This method is used to reset the device to its default settings without erasing all data on the device. It is recommended for devices that need to be restored to their default settings due to some configuration issues.
In conclusion, there are several ways to reset or factory restore a Telit G90 device. The most common and recommended methods are hardware reset, remote reset, and configuration update. It is recommended to choose the method that best suits your needs and use it only when necessary.
