How to reset or factory restore Tel.Me. T909 device?
Tel.Me T909 phones are made by the same manufacturer as Nokia 6120, Nokia 6197, and Nokia 6210 phones, among others. If you want to reset or factory restore your Tel.Me T909 phone, here are the most common and recommended ways to do so:
## Method 1: Using a PC
### Requirements
* A Windows PC or laptop
* The Tel.Me T909 phone
* The USB cable for the phone
### Steps
1. Connect the Tel.Me T909 phone to the PC or laptop using the USB cable.
2. Go to the Tel.Me T909 website on the PC or laptop and navigate to the support section.
3. Click on the download link for the firmware update for your phone.
4. Install the firmware update on your phone.
5. After the firmware update is complete, disconnect the phone from the PC or laptop.
6. Turn off the phone and press the "Menu" button until the "Reset" option appears.
7. Press the "Reset" button and the phone will start in factory mode, where you can set up a new phone.
## Method 2: Using a 3-point connector model
### Requirements
* A Tel.Me T909 phone
* The 3-point connector for the phone
* The recovery image for the phone
### Steps
1. Connect the Tel.Me T909 phone to a PC or laptop using the 3-point connector.
2. Navigate to the Tel.Me T909 support section on the PC or laptop and download the recovery image for the phone.
3. Place the recovery image file into a location on the PC or laptop that is accessible through the Tel.Me terminal.
4. Open the Tel.Me terminal on the PC or laptop.
5. Enter the commands to connect to the phone via the recovery image and authenticate yourself.
6. Once authenticated, navigate to the "Software" menu and select "Restart Device."
7. The phone will start in recovery mode and you can set up a new phone.
