What are the features of Tecno Pop 5c?
Tecno Pop 5c features a 6.52-inch IPS LCD display, MediaTek Helio A25 processor, 2GB of RAM, 32GB of internal storage, a 5000mAh battery, and a dual rear camera setup.
How to reset or factory restore Tecno Pop 5c device?
Tecno Pop 5c is a smartphone developed by Tecno that runs on the Android operating system. When a smartphone runs into problems such as not booting up, slow performance, or lagging, users may want to reset or factory restore it to its default settings. In this article, we will discuss the most common and recommended ways to reset or factory restore a Tecno Pop 5c device.
Method 1: Resetting the device through Settings menu
1. Turn off the device
2. Press and hold the Volume up button and the Power button simultaneously for 10 seconds until the bootloader screen appears.
3. Connect your device to your computer using a USB cable.
4. Open the Fastboot program on your computer and enter the following command: fastboot devices
5. This will display a list of connected devices. Make sure your device is listed.
6. Enter the following command: fastboot reset
7. Confirm the reset by selecting Yes from the bootloader menu.
8. After the reset, your device will reboot in recovery mode. From here, you can selectboot > Reboot system and finish resetting your device.
Method 2: Resetting the device through Recovery menu
1. Turn off the device
2. Press and hold the Volume up button and the Power button simultaneously for 10 seconds until the bootloader screen appears.
3. Connect your device to your computer using a USB cable.
4. Open the Fastboot program on your computer and enter the following command: fastboot devices
5. This will display a list of connected devices. Make sure your device is listed.
6. Enter the following command: fastboot boot recovery
7. Your device will boot into the recovery menu.
8. Select Wipe data/factory reset and follow the instructions to reset your device.
Method 3: Resetting the device through Fastboot
1. Turn off the device
2. Connect your device to your computer using a USB cable.
3. Open the Fastboot program on your computer and enter the following command: fastboot devices
4. This will display a list of connected devices. Make sure your device is listed.
5. Enter the following command: fastboot oem unlock
6. Follow the prompts to unlock your device.
7. Enter the following command: fastboot format
8. Follow the prompts to format your device.
9. After formatting is complete, your device will reboot in recovery mode. From here, you can selectboot > Reboot system and finish resetting your device.
Method 4: Restoring the device to stock ROM
If your Tecno Pop 5c device is facing software-related issues, restoring it to its stock ROM can help fix those issues. Here's how to restore your device to stock ROM using Fastboot:
1. Turn off the device
2. Connect your device to your computer using a USB cable.
3. Download the stock ROM for your device.
4. Extract the ROM file to your computer.
5. Open the Fastboot program on your computer and enter the following command: fastboot flash recovery recovery.img
6. Reboot your device into recovery mode by pressing and holding the Volume up and Power buttons simultaneously.
7. Goto recovery settings and select install from SD Card.
8. Navigate to the ROM file you extracted on your computer and select and install it.
9. After installation is complete, reboot your device and enjoy your device with stock ROM.
Conclusion
There are several ways to reset or factory restore a Tecno Pop 5c device. However, it is important to note that resetting a device will result in the loss of all your data and settings. Therefore, it is recommended that you make a backup of your data before resetting your device. After backing up your data, choose the appropriate method of resetting your device based on the issue you are experiencing.
