What are the features of Tecno Phantom X?
Tecno Phantom X features a 6.4-inch IPS LCD display, MediaTek Helio P22 processor, 4GB of RAM, 64GB of internal storage, a 3000mAh battery, and a dual rear camera setup.
How to reset or factory restore Tecno Phantom X device?
Tecno Phantom X is a great smartphone with excellent performance and features. However, sometimes users may face issues on their device, and the best solution is to reset or factory restore it to its original state. In this guide, we will discuss the two most common and recommended ways to reset or factory restore a Tecno Phantom X device.
Method 1: Using the Settings Menu
The easiest way to reset the Tecno Phantom X device is to use the settings menu. Here are the steps to follow:
1. Turn off the Tecno Phantom X device.
2. Press and hold the Power button, Volume Up, and Volume Up buttons simultaneously for about 30 seconds until the Tecno logo appears on the screen.
3. Release the Power button, but continue to press and hold the Volume Up and Volume Up buttons.
4. Tecno's bootloader will appear on the screen. Scroll down to select the option to "Bootloader - Apply Update" and press the Volume Up button to select it.
5. The device will begin the reset process, and you will be prompted to enter the PIN to confirm the reset. Enter the PIN number you created when setting up the device.
6. Once the reset is complete, the Tecno logo will appear on the screen, and the device will restart.
Method 2: Using a Computer
Another way to reset the Tecno Phantom X device is by using a computer. Here are the steps to follow:
1. Connect the Tecno Phantom X device to the computer using a USB cable.
2. Download the Tecno Phantom X firmware from the Tecno website.
3. Install the latest version of the USB driver for Tecno devices on your computer.
4. Disable the USB debugging on your cellphone.
5. Backup all your important data on your computer or cloud storage.
6. Open a command prompt on your computer and navigate to the folder where the firmware downloaded.
7. Run the command "adb reboot bootloader" to enter the bootloader menu.
8. Select "Extensions" and then "Backup." This will create a backup of your device's data.
9. Select "Format Filesystem" and then "Yes, delete user data." This will erase all the data on your device.
10. Once the reset is complete, select "Reboot system" and then "Resume Bootloader."
11. Disconnect the Tecno Phantom X device from the computer and wait for the device to reboot.
In conclusion, resetting or factory resetting a Tecno Phantom X device can be done easily through the settings menu or using a computer. Before resetting or factory resetting, it is essential to back up your data to avoid losing it.
