How to reset or factory restore Tecno Camon CX Air device?
Sure, there are three common ways to reset or factory restore a Tecno Camon CX Air device:
1. Using hardware buttons:
* Turn off your device.
* Press and hold the Volume Down button and the Power button simultaneously for 10 seconds until the screen goes black.
* Release both buttons and wait for a few seconds for the device to restart.
* After the device has restarted, press and hold the Volume Down button and the Power button simultaneously again for 30 seconds until the Tecno logo appears on the screen.
* Once the logo appears, release the buttons and use the Volume Up button to select "Wipe data/factory reset" and press the Power button to confirm the selection.
2. Using recovery mode:
* Turn off your device and connect it to your computer using a USB cable.
* On your computer, install the Tecno USB drivers and make sure your computer can detect the device.
* Once your device is detected, open a command prompt and type "adb devices" to check if the device is recognized by your computer.
* If the device is recognized, type "adb reboot recovery" and your device should enter recovery mode.
* Once in recovery mode, use the Volume Up and Volume Down buttons to navigate to "Wipe data/factory reset" and press the Power button to confirm the selection.
3. Using a PC:
* Turn off your device.
* Connect it to your computer using a USB cable.
* On your computer, install the Tecno USB drivers and make sure your computer can detect the device.
* Open a command prompt and type "adb devices" to check if the device is recognized by your computer.
* If the device is recognized, type "adb reboot bootloader" and your device should enter the bootloader menu.
* Once in the bootloader menu, use the Volume Up and Volume Down buttons to navigate to "Recover from USB" and press the Power button to confirm the selection.
* Connect your device to your computer using a USB cable and make sure your computer can detect the device.
* Open a command prompt and type "adb push recovery recovery.img /sdcard/" to move the recovery image file to your device's storage.
* Disconnect your device from your computer, go back to the bootloader menu and use the Volume Up and Volume Down buttons to navigate to "Recover from USB" and press the Power button to confirm the selection.
It is recommended to use the first method using hardware buttons as it is the most common and easiest one. All methods have their own advantages and disadvantages, so you should choose the one that suits your needs and preferences.
