How to reset or factory restore TCL Tab 10s 5G device?
Sure, here are the most common and recommended ways to reset or factory restore a TCL Tab 10s 5G device:
## Method 1: Using the Power Button and Volume Key
1. Turn off the device by pressing and holding the power button until it shuts down completely.
2. Press and hold the power button and volume key simultaneously until the device enters recovery mode.
3. Release the volume key, but continue holding the power button until you enter the wipe data/factory reset menu.
4. Select "Yes – Delete all user data" using the volume keys and press the power button.
5. Wait for the device to reset, which may take several minutes.
## Method 2: Using Google Assistant
1. Open Google Assistant on your device.
2. Say "Ok Google, reset system settings."
3. Confirm the action when prompted.
4. Wait for the device to reset, which may take several minutes.
## Method 3: Using a Computer and USB Cable
1. Connect your device to a computer using a USB cable.
2. Open the Google Factory Images Tool on your computer by going to:
3. Select the appropriate image for your device and check the MD5 checksum.
4. Enable USB debugging on your device by going to Settings > Developers options > USB debugging.
5. Select "Recovery image" in the Google Factory Images Tool.
6. Connect your device to the computer and select it in the tool.
7. Click "Build and send".
8. Wait for the device to reset, which may take several minutes.
Note: It's important to note that these methods will completely erase all data on your device, so it's essential to take a backup of any important data before attempting any of these methods. It's also recommended to use a trusted source for the firmware images to avoid any potential harm to your device.
