TCL NxtPaper 10s

Home/ TCL/ Phones/ NxtPaper 10s

Table of Contents

Summary

TCL NxtPaper 10s Price

The retail price of a new or used/second hand TCL NxtPaper 10s varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of TCL NxtPaper 10s across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What type of processor does the TCL NxtPaper 10s have?

The TCL NxtPaper 10s is powered by a Qualcomm Snapdragon 662 processor.

How to reset or factory restore TCL NxtPaper 10s device?

The TCL NxtPaper 10s is a tabletop smart display that runs on the TCL operating system. If you've made some changes or encountered a problem with the device, you may need to reset or factory restore it. Here are the steps to do so: 1. Press and hold the power button (located at the bottom left corner of the device) for 10 seconds until the power menu appears. 2. Select "Reset to default settings" (this option may be located under a different name depending on your device's firmware version). 3. Confirm your choice by selecting "Yes" when prompted. 4. The device will now reset to its default settings. This process may take a few minutes to complete. 5. Once the device has finished resetting, you can continue to use it as normal. It's important to note that resetting the device will erase all of your saved settings, bookmarks, and other data. Therefore, make sure to save any important information before resetting the device. In addition to the above steps, you can also perform a factory restore of the device. This involves resetting the device to its factory settings, including erasing all of the data on the device. To perform a factory restore, you will need to use a USB cable to connect the device to your computer. 1. Insert the USB cable into the device and into your computer. 2. Go to the manufacturer's website and download the latest firmware for the device. 3. Open the firmware installation file and follow the on-screen instructions to install it on the device. 4. Once the firmware has been installed, the device will reset to its factory settings. 5. disconnect the device from the computer and use it as normal. Again, it's important to note that a factory restore will erase all of the data on the device, so make sure to save any important information before performing a factory restore.

What type of display does the TCL NxtPaper 10s have?

The TCL NxtPaper 10s has a 10.1-inch IPS LCD display with a resolution of 1200 x 1920 pixels.

What type of camera does the TCL NxtPaper 10s have?

The TCL NxtPaper 10s has a dual rear camera setup consisting of a 13MP primary camera and a 2MP depth sensor.

Specifications

Network

Technology: No cellular connectivity
2G bands: N/A
3G bands: N/A
GPRS: No
EDGE: No

Launch

Announced: 2022, January 04
Status: Available. Released 2022, Q3

Body

Dimensions: 241 x 158.6 x 8.3 mm (9.49 x 6.24 x 0.33 in)
Weight: 490 g (1.08 lb)
SIM: No
: Stylus support

Display

Type: NCVM IPS
Size: 10.1 inches, 295.8 cm2 (~77.4% screen-to-body ratio)
Resolution: 1200 x 1920 pixels, 16:10 ratio (~224 ppi density)

Platform

OS: Android 11
Chipset: Mediatek MT8768
CPU: Octa-core (4x2.0 GHz Cortex-A53 & 4x1.5 GHz Cortex-A53)
GPU: PowerVR GE8320

Memory

Card slot: microSDXC
Internal: 64GB 4GB RAM
: eMMC 5.1

Main Camera

Single: 8 MP, f/2.0, (wide), 1/4", 1.12µm, AF
Features: LED flash
Video: 1080p@30fps

Selfie camera

Single: 5 MP, f/2.2, (wide), 1/5", 1.12µm
Video: 1080p@30fps

Sound

Loudspeaker: Yes, with dual speakers
3.5mm jack: Yes

Comms

WLAN: Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi Direct
Bluetooth: 5.0, A2DP, LE
Positioning: GPS
NFC: No
Radio: FM radio, RDS
USB: USB Type-C 2.0