How to reset or factory restore Spice M-6868N FLO ME device?
The Spice M-6868N FLO ME is a PDA that runs on the Windows Mobile operating system. To reset or factory restore this device, you can follow these steps:
1. Battery power: Ensure that the device is powered off and the battery is removed.
2. Power Button: Press the power button and hold it down until the device starts to turn on.
3. Volume Up and Down: At the same time as pressing the power button, also press the volume up and down buttons until you hear a beep sound.
4. Release buttons: Release the power and volume up/down buttons.
5. Enter Bootloader: Press and hold the power and volume down buttons once more until the Spice logo appears or the device starts to vibrate.
6. Release buttons: Release the power and volume down buttons.
7. Wait for Bootloader: The device will enter bootloader mode. Here, you can see the "--HBDOTISJBOOTLOADER--" and a menu listed in the bootloader mode.
8. Select "Factory Reset". This may be optioned as "Clear Device" or "Reset to defaults" on the bootloader menu.
9. Confirm the reset. You may be prompted by a message asking you to confirm the reset. If you select "Yes" or "OK", the reset process will begin.
10. Wait for Reset: The device will begin to reset to its factory settings, which takes some time. Do not press any buttons during this process.
11. Wait for Bootloader: After the device has been reset, it will reboot to bootloader mode.
12. Select "Normal Boot". This option will allow the device to reboot into the normal operating system.
13. Enter PIN or Password: You may be prompted to enter the device's PIN or password. If you have forgotten your PIN or password, the device may be bricked and it cannot be reset to factory settings.
It's important to note that resetting a device erases all user data and resets to factory settings. Therefore, make sure to back up any important data before resetting the device.
