How to reset or factory restore Sony CMD Z7 device?
If you want to reset or factory restore your Sony CMD Z7 device, then you have to go through several steps. Here are the most common and recommended ways to reset or factory restore a Sony CMD Z7 device:
Method 1: Soft Reset
A soft reset resets the device to its default settings without deleting any data. To perform a soft reset on your CMD Z7 device, follow these steps:
1. Turn off the device by pressing and holding the power button.
2. Press and hold the volume up button and the power button simultaneously.
3. Release the buttons when the device starts to turn on.
4. The device will enter into recovery mode.
5. Select “Yes” using the volume buttons and press the power button to confirm.
6. The device will start resetting.
7. Wait for the device to restart and verify that the reset was successful.
Method 2: Hard Reset
A hard reset resets the device to its factory settings and deletes all data. To perform a hard reset on your CMD Z7 device, follow these steps:
1. Back up all your important data to a computer or cloud storage.
2. Turn off the device by pressing and holding the power button.
3. Press and hold the volume up button and the power button simultaneously.
4. Release the buttons when you see the “Power off” message.
5. Press and hold the volume up button and the power button simultaneously again.
6. Release the buttons when the device starts to turn on.
7. The device will enter into recovery mode.
8. Select “Yes” using the volume buttons and press the power button to confirm.
9. The device will start erasing data.
10. Wait for the device to restart and verify that the hard reset was successful.
Note: Performing a hard reset can permanently erase all data on the device. It is recommended that you back up your important data before proceeding with a hard reset.
