What are the features of the Siemens Xelibri 8?
The Siemens Xelibri 8 features a large color display, a full QWERTY keyboard, a built-in camera, Bluetooth connectivity, and a built-in MP3 player.
How to reset or factory restore Siemens Xelibri 8 device?
Here are the recommended ways to reset or factory restore a Siemens Xelibri 8 device:
1. Power turning on and off:
Turn off the device by pressing and holding the power button until the power turns off. Then unplug the device from the power source. Wait for around 30 seconds and plug the device back into the power source. Press and hold the power button until the device turns on. This will refresh the device and clear any temporary issues that may be causing problems.
2. Hard Reset (resetting to factory settings):
This method is recommended when no other solution works. It will erase all data on the device, including contacts, messages, and settings, and restore the device to its factory state. To perform a hard reset, follow these steps:
a. Turn off the device by pressing and holding the power button until the power turns off.
b. Press and hold the Volume down button and the Power button simultaneously until you see the Siemens logo on the screen.
c. Release both buttons and wait for the device to reset.
d. Once the reset is complete, press and hold the Volume down button and the Power button until you see the Siemens logo on the screen.
e. Release both buttons and wait for the device to turn on.
3. Resetting Network Settings:
If you are having trouble connecting to a WiFi network or Bluetooth device, you can reset the network settings to factory defaults. To do this, follow these steps:
a. Go to Menu > Settings > Network.
b. Select "Reset network settings" and confirm the action.
c. The device will now be reset to factory defaults for network settings.
It is important to note that factory resetting will erase all data on the device, so make sure to back up any important information before performing a hard reset.
