Name: Siemens Xelibri 3
Brand: Siemens

Question 1

What is the battery life of the Siemens Xelibri 3?

Accepted Answer

The battery life of the Siemens Xelibri 3 is up to 5 hours of talk time and up to 200 hours of standby time.

Question 2

How to reset or factory restore Siemens Xelibri 3 device?

Accepted Answer

The most common and recommended ways to reset or factory restore a Siemens Xelibri 3 device are:

Method 1: Resetting the device through the device's interface

1. Turn off the device and unplug it from the power source.
2. Press and hold down the "#0" key on the device's keyboard until the ("s•") menu appears.
3. Press "sol" (Sequence of digits).
4. Select "Freq".
5. Select "Manual".
6. Press and hold the "vol up" key until "f" appears on the device's display.
7. Release the "vol up" key.
8. Press and hold the "vol down" key until "FRE" appears on the device's display.
9. Release the "vol down" key.
10. Press and hold the "0" key until "4:3" appears on the device's display.
11. Release the "0" key.
12. Select "rosc" (Sequence of letters).
13. Enter the factory reset password (if available). If the device does not have a factory reset password, enter "9876".
14. Press "1".
15. Select "!!!".
16. Select "reset".
17. Release all buttons.
18. Turn on the device and wait for it to reboot.

Method 2: Resetting the device by using a carrier or manufacturer's website

1. Visit the carrier or manufacturer's website.
2. Follow the instructions to access the device's firmware update.
3. Select "reset" or "factory reset" as the update option.
4. Follow the prompts to confirm the reset and begin the process.
5. Wait for the process to complete and turn on the device.

Method 3: Resetting the device by performing a hard reset

1. Turn off the device and unplug it from the power source.
2. Press and hold down the "vol down" key and the "0" key simultaneously.
3. Release both keys when "FRE" appears on the device's display.
4. Press the "vol down" key until "9" appears.
5. Release the "vol down" key.
6. Press the "vol down" key until "3" appears.
7. Release the "vol down" key.
8. Press the "vol down" key until "8" appears.
9. Release the "vol down" key.
10. Press "0".
11. Release the "0" key.
12. Press "1".
13. Release the "1" key.
14. “1” will appear on the screen. Press “1” again and wait for 5 seconds
15. Turn off the device and wait for 30 seconds before turning it back on.
16. Turn on the device and wait for it to reboot.

Note: Restoring a factory reset on a Siemens Xelibri 3 could erase all data and settings previously stored on the device, so make sure to backup important data before resetting.

Question 3

What type of SIM card does the Siemens Xelibri 3 use?

Accepted Answer

The Siemens Xelibri 3 uses a mini-SIM card.

Question 4

What are the dimensions of the Siemens Xelibri 3?

Accepted Answer

The dimensions of the Siemens Xelibri 3 are 109 x 44 x 18 mm (4.29 x 1.73 x 0.71 in).

Technology	GSM
2G bands	GSM 900 / 1800
GPRS	No
EDGE	No

Announced	2003, Q2
Status	Discontinued

Dimensions	74 x 43 x 20 mm, 48 cc (2.91 x 1.69 x 0.79 in)
Weight	55 g (1.94 oz)
SIM	Mini-SIM

Type	Monochrome graphic
Size
Resolution	101 x 56 pixels, 5 lines, 17:9 ratio
Screensaver Downloadable pictures Digit dial with Navi key

Card slot	No
Phonebook	100
Call records	10 dialed, 10 received, 10 missed calls
Predefined short messages

Siemens Xelibri 3