How to reset or factory restore Siemens SL42 device?
Sure! Here are the most common and recommended ways to reset or factory restore a Siemens SL42 device:
1. Using the Machine Standalone:
To perform a machine standalone reset, follow these steps:
a. Turn off the SL42 controller.
b. Unplug the controller from the network using Ethernet cable.
c. Press and hold the "&" and "NUM" keys at the same time. This will enter user mode.
d. Keep the "&" and "NUM" keys pressed and choose "CONTROLLER PORT" menu option by using the numerical keys.
e. Select the "QUERY" option.
f. In the "PORT CONFIG menu," choose "CONTROLLER CONFIG."
g. In the "CONTROLLER CONFIG" submenu, select "EXTRA PARAMETERS."
h. Under "ADDITIONAL PARAMETERS," select "CONTROLLER RESET."
i. Enter "Y" to confirm the reset.
j. The system will restart and enter the controller configuration mode.
2. Using the Machine Reset File:
To perform a controller reset using the reset file, follow these steps:
a. Save the controller's firmware to a USB flash drive.
b. Connect the USB flash drive to the controller.
c. Turn off the SL42 controller.
d. Press and hold the "&" and "NUM" keys at the same time. This will enter user mode.
e. Keep the "&" and "NUM" keys pressed and choose "CONTROLLER PORT" menu option by using the numerical keys.
f. Select the "QUERY" option.
g. In the "PORT CONFIG menu," choose "CONTROLLER CONFIG."
h. In the "CONTROLLER CONFIG" submenu, select "EXTRA PARAMETERS."
i. Choose "CONTROLLER RESET FILE" from the menu.
j. Select the reset file saved in the USB flash drive.
k. Enter "Y" to confirm the reset.
l. The system will restart and enter the controller configuration mode.
Note: Resetting the device will erase all of its current configuration and data, so it's important to save any important information before proceeding with the reset. It's also recommended to perform the reset using the first method, as it's more reliable and precise.
