How to reset or factory restore Siemens CC75 device?
The CC75 device is a cellular communication module that is used in VDEMs or other control cabinets for various applications. Here are the recommended ways to reset or factory restore a Siemens CC75:
Method 1: Using the Dispenser Machine Interface (DMI)
1. Connect the CC75 device to the dispenser machine interface (DMI) using a USB cable or via a suitable interface (e.g. NFIA-5, CRDA).
2. Launch the DMI client software on your PC and connect to the CC75 device.
3. Access the CC75 device configuration menu by navigating to the "Controls" menu and selecting the "Application Control" function.
4. Select "Reset" from the system settings menu to perform a device reset.
5. After the reset is complete, the device will restart and prompt you to enter the new configuration settings.
Method 2: Using the Cultural Mobility Application Software (CAMS)
1. Connect the CC75 device to your PC using a USB cable.
2. Install the CAMS software on your PC and launch it.
3. Select the CC75 device from the list of available devices and connect to it.
4. In the device settings, select the "Application Control" function and then select "Reset".
5. After the reset is complete, the device will restart and prompt you to enter the new configuration settings.
Method 3: Using the SIM autonomous initialization (SIM-AI)
1. Reset the SIM card in the CC75 device to its default settings.
2. Disconnect the device from the dispenser or PC and reinsert the SIM card.
3. Insert a new PIN code for the SIM card and wait for it to initialize.
4. After initialization is complete, the device will restart and prompt you to enter the new configuration settings.
Method 4: Using the CC75 Input/Output (I/O) Circuit
1. Connect the CC75 device to a suitable circuit that allows for device resetting.
2. Apply the reset signal to the device according to the specified protocols and timings.
3. Observe the device to ensure that it restarts and prompts you to enter the new configuration settings.
It is important to note that the reset process may vary depending on the specific configuration of your device and applications. It is recommended to refer to the CC75 device documentation or seek assistance from Siemens support for proper device resetting and configuration.
What is the battery life of the Siemens CC75?
The battery life of the Siemens CC75 is up to 20 hours.
What are the features of the Siemens CC75?
The features of the Siemens CC75 include a 6.6-inch HD display, a 13MP rear camera, a 5MP front camera, a Qualcomm Snapdragon 617 processor, and 4GB of RAM.
What is the storage capacity of the Siemens CC75?
The storage capacity of the Siemens CC75 is 64GB.
