The Sharp Pi is a mid-range Android tablet released in 2018. It has a 10.1-inch IPS LCD display with a resolution of 1200 x 1920 pixels. It is powered by a Qualcomm Snapdragon 625 processor and 3GB of RAM. It has a 5MP rear-facing camera and a 2MP front-facing camera. It also has 32GB of internal storage and a 6000mAh battery.
Sharp Pi Price
At the time of it's release in 2018, March, the manufacturer's retail price for a new Sharp Pi was about 110 EUR.
The retail price of a new or used/second hand Sharp Pi varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Sharp Pi across different regions, markets and countries.
Frequently Asked Questions(FAQs)
What is the display size of the Sharp Pi?
5.5 inches
What is the resolution of the Sharp Pi?
1080 x 1920 pixels
How to reset or factory restore Sharp Pi device?
Sure, here are the most common and recommended ways to reset or factory restore a Sharp Pi device: 1. Using the Sharp Pi setup utility: This is the recommended method for resetting or factory restoring a Sharp Pi device. To use this method, follow these steps: * Connect the Sharp Pi device to your computer using a USB cable. * Download and install the Sharp Pi setup utility from the Sharp Pi website. * Run the setup utility and select "Reset to Factory Default". * Follow the on-screen instructions to complete the reset process. 2. Using the Sharp Pi reset button: Some Sharp Pi devices have a reset button that you can use to reset the device to its default settings. To use this method, follow these steps: * Connect the Sharp Pi device to your computer using a USB cable. * Power off the Sharp Pi device. * Press and hold the reset button for 10 seconds. * Release the reset button and wait for the Sharp Pi device to restart. * The setup screen should appear, allowing you to set up the device as if it were new. 3. Using a recovery image: In some cases, it may not be possible to reset the Sharp Pi device using either of the methods above. In these situations, you may need to use a recovery image to restore the device to its default settings. * Download the recovery image from the Sharp Pi website. * Connect the Sharp Pi device to your computer using a USB cable. * Power off the Sharp Pi device. * Press and hold the volume down button and the power button simultaneously for 10 seconds. * Release the buttons and connect the USB cable to the Sharp Pi device. * The recovery screen should appear, allowing you to select the recovery image and complete the restore process. It's important to note that resetting or factory restoring a Sharp Pi device will erase all user data, so be sure to back up any important files before proceeding with these methods.
What is the battery capacity of the Sharp Pi?
3000 mAh
Specifications
Network
| Technology | GSM / HSPA / LTE |
|---|---|
| 2G bands | GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 |
| 3G bands | HSDPA 850 / 900 / 1900 / 2100 |
| 4G bands | 1, 3, 5, 7, 8, 40 |
| Speed | HSPA 42.2/5.76 Mbps, LTE Cat4 150/50 Mbps |
Launch
| Announced | 2018, February |
|---|---|
| Status | Available. Released 2018, March |
Body
| Dimensions | - |
|---|---|
| Weight | - |
| SIM | Dual SIM (Nano-SIM, dual stand-by) |
Display
| Type | IPS LCD |
|---|---|
| Size | 5.2 inches, 74.5 cm2 |
| Resolution | 720 x 1280 pixels, 16:9 ratio (~282 ppi density) |
| Protection | Scratch-resistant glass |
Platform
| OS | Android 7.0 (Nougat) |
|---|---|
| Chipset | Mediatek MT6737M (28 nm) |
| CPU | Quad-core 1.3 GHz Cortex-A53 |
| GPU | Mali-T720 |
Memory
| Card slot | microSDXC |
|---|---|
| Internal | 16GB 2GB RAM |
| eMMC 5.0 | |
Main Camera
| Dual | 13 MP, f/2.2, AF 2 MP, (depth) |
|---|---|
| Features | LED flash, panorama, HDR |
| Video | 1080p@30fps |
Selfie camera
| Single | 8 MP |
|---|---|
| Video |
Sound
| Loudspeaker | Yes |
|---|---|
| 3.5mm jack | No |
Comms
| WLAN | Wi-Fi 802.11 b/g/n, Wi-Fi Direct |
|---|---|
| Bluetooth | 4.0, A2DP |
| Positioning | GPS |
| NFC | No |
| Radio | FM radio |
| USB | microUSB 2.0, OTG |
Features
| Sensors | Fingerprint (front-mounted), accelerometer, proximity |
|---|
Battery
| Type | Li-Ion 3000 mAh battery |
|---|
Misc
| Colors | White/Gold, black |
|---|---|
| Price | About 110 EUR |
