How to reset or factory restore Samsung S9402 Ego device?
There are several ways to reset or factory restore a Samsung S9402 Ego device, and the method that you choose may depend on your specific needs and preferences. Here are some of the most common and recommended methods:
Method 1: Using Hard Reset (Bootloader)
To use the hard reset, also known as bootloader reset, follow these steps:
1. Turn off your Samsung S9402 Ego device.
2. Press and hold the Power button and the Volume Up button until the Samsung logo appears on the screen.
3. Release both buttons and wait for the bootloader screen to appear.
4. Connect your device to your computer using a USB cable.
5. Open the Samsung Smart Switch program on your computer.
6. Select "Beginner mode" and then "Back up now."
7. Wait for the backup process to complete.
8. Select "Gesture or Password erase" and then "Yes - erase user data/factory data."
9. Wait for the erase process to complete.
10. Disconnect your device from the computer.
11. Press and hold the Power button until the Samsung logo appears on the screen.
12. Release the Power button and then press and hold the Volume Up button until the bootloader screen appears.
13. Select "Yes - boot into recovery."
14. Wait for the recovery screen to appear.
15. Select "Yes - Yes – Install updates from SD card."
16. Press the Volume Down button until "Recovery software" appears on the screen.
17. Select "Recovery software" and then "Yes – Yes."
18. Select "No – Yes" to confirm the installation.
Method 2: Using Software Reset (Odin)
To use the software reset, also known as Odin reset, follow these steps:
1. Download the Odin program from the Samsung website.
2. Turn off your Samsung S9402 Ego device.
3. Connect your device to your computer using a USB cable.
4. Run the Odin program on your computer and make sure that your device is detected.
5. Click on the "BL" button and select the Odin flashable firmware for your device.
6. Click on the "AP" button and select the non-volatile recovery firmware for your device.
7. Wait for the Odin program to detect your device and start the flashing process.
8. Wait for the flashing process to complete.
9. Disconnect your device from the computer and press and hold the Power button until the Samsung logo appears on the screen.
10. Release the Power button and then press and hold the Volume Up button until the bootloader screen appears.
11. Select "Yes - boot into recovery."
12. Wait for the recovery screen to appear.
13. Select "Yes - Yes – Install updates from SD card."
14. Press the Volume Down button until "Recovery software" appears on the screen.
15. Select "Recovery software" and then "Yes – Yes."
16. Select "No – Yes" to confirm the installation.
Method 3: Using FlashingFirmware to Reset
To use FlashingFirmware to reset your Samsung S9402 Ego device, follow these steps:
1. Download the FlashingFirmware program from the FlashingFirmware website.
2. Turn off your Samsung S9402 Ego device.
3. Connect your device to your computer using a USB cable.
4. Run the FlashingFirmware program on your computer and make sure
