How to reset or factory restore Samsung S401i device?
Resetting or factory restoring a Samsung S401i device is a straightforward process as it comes with the built-in option to perform a hard reset. However, it is advisable to proceed with caution as this action will erase all data and settings on the phone, including important information and files. Therefore, it is recommended to back up the data before the process of resetting the device. Here are the most common and recommended ways to reset or factory restore a Samsung S401i device:
Method 1: Performing a Hard Reset
embarrassed
1. Turn off your device by pressing and holding the power button until the phone shuts down.
2. Next, press and hold the power button + volume up button at the same time until you see the Samsung logo on the screen.
3. Now, use the volume buttons to highlight "Wipe data/factory data reset" and press the power button to confirm.
4. The phone will restart and a warning message will appear, asking if you want to erase user data. Failure to proceed with the erase will result in the phone becoming unresponsive. Press the power button to confirm and proceed with the erase.
5. The phone will start to reset, which may take several minutes. Once the reset is complete, the phone will restart and prompt you to set up a new device.
Method 2: Using a Computer
1. Download and install the Samsung Smart Switch software on your computer.
2. Connect your Samsung S401i device to your computer using a USB cable.
3. The Samsung Smart Switch software will detect the device and prompt you to backup your data. Complete the backup process to a specified location on your computer.
4. Once the backup is complete, disconnect your device from the computer and remove the USB cable.
5. Turn off your device by pressing and holding the power button until the phone shuts down.
6. Press and hold the volume up button until you see the Samsung logo on the screen.
7. Next, use the volume buttons to highlight "Home button" and press the power button to confirm.
8. The phone will restart and the Samsung Smart Switch software will appear on the screen. Select the "Restore" option and follow the on-screen instructions to restore the device to its factory settings.
Note: Focus on the method 2 as it allows you to back up your data before resetting the device, which is advised to avoid losing any important information.
