How to reset or factory restore Samsung R520 Trill device?
Sure, here are the most common and recommended ways to reset or factory restore a Samsung R520 Trill device:
1. Using the physical keyboard:
- Turn off the device by pressing and holding the power button for 5-10 seconds until the device turns off.
- Press and hold the Volume Up button and Power button at the same time until you see the Samsung logo.
- Release the Volume Up button and press the Volume Down button until you see Wipe data/factory data.
- Press the Volume Down button again until you see Yes, delete all user data.
- Press the Volume Up button to select Yes.
- Wait for the device to start resetting, which may take several minutes.
2. Using Smart Switch:
- Download and install the Smart Switch app on your computer.
- Connect the Samsung R520 Trill device to your computer using a USB cable.
- Launch the Smart Switch app and select "Backup".
- Select "Trill(R520G)" as the device and make sure "Factory data reset" is selected.
- Click "Backup KEY via Smart Switch" and enter a password.
- Click "Backup".
- Disconnect the device from the computer and turn it off.
- Press and hold the Volume Up button and Power button at the same time until you see the Samsung logo.
- Release the Volume Up button and press the Volume Down button until you see Wipe data/factory data.
- Press the Volume Down button again until you see Yes, delete all user data.
- Press the Volume Up button to select Yes.
- Wait for the device to start resetting, which may take several minutes.
3. Using Samsung Kies:
- Download and install the Samsung Kies application on your computer.
- Connect the Samsung R520 Trill device to your computer using a USB cable.
- Launch the Samsung Kies application and select "Backup/Restore".
- Select "Trill(R520G)" as the device and make sure "Factory data reset" is selected.
- Click "Backup".
- Disconnect the device from the computer and turn it off.
- Press and hold the Volume Up button and Power button at the same time until you see the Samsung logo.
- Release the Volume Up button and press the Volume Down button until you see Wipe data/factory data.
- Press the Volume Down button again until you see Yes, delete all user data.
- Press the Volume Up button to select Yes.
- Wait for the device to start resetting, which may take several minutes.
Note: Performing a factory reset will delete all data on your device, including contacts, messages, and other personal data. Make sure to backup your important data before proceeding with a factory reset.
