How to reset or factory restore Samsung M920 Transform device?
There are different ways to reset or factory restore a Samsung M920 Transform device, depending on the specific situation and need. However, some of the most common and recommended methods are as follows:
1. Hardware Reset (Using the physical buttons)
* Turn off the device by pressing and holding the power button until it turns off.
* Press and hold the Volume Up button and the Power button at the same time until the Samsung logo appears.
* Release the Power button, but continue to hold the Volume Up button.
* Wait for the device to enter the recovery mode.
* In the recovery mode, select "Wipe Data/Factory Data Reset".
* Confirm the selection and wait for the device to reset.
Note: This method will erase all user data and settings, including system files. It is recommended to back up important data before performing a hardware reset.
2. PC Reset (Using Samsung Smart Switch)
* Connect the Samsung M920 Transform device to a computer using the USB cable.
* Open Samsung Smart Switch on the computer and select "Reset device".
* Follow the on-screen instructions to backup important data (if any).
* Connect the Samsung M920 Transform device to the charger and press and hold the Volume Up button and the Power button at the same time until the Samsung logo appears.
* Release the Power button, but continue to hold the Volume Up button.
* Wait for the device to enter the recovery mode.
* In the recovery mode, select "Wipe Data/Factory Data Reset".
* Confirm the selection and wait for the device to reset.
Note: This method will also erase all user data and settings, including system files. It is recommended to back up important data before performing a PC reset.
3. OTA (Over-the-Air) Update
* Go to the "Settings" menu on the Samsung M920 Transform device.
* Scroll down and select "About phone".
* Scroll down to "System updates".
* Tap "Check for updates".
* If an update is available, tap "Download and install".
* Wait for the device to update and restart.
Note: This method will only erase the cache and data files. It will not erase the system files or settings. This method should be used with caution, as it may cause data loss if not performed correctly.
Overall, the most recommended method to reset or factory restore a Samsung M920 Transform device is the hardware reset using the physical buttons. It is a safe and reliable method, but it will erase all data and settings. It is important to back up important data before performing any reset or factory data cleanup.
