How to reset or factory restore Samsung M350 Seek device?
The Samsung M350 Seek is a high-end digital camera that offers a lot of fun and creative features. However, sometimes, it may become unresponsive or slow down, and the user may want to reset the device to its factory settings. In this article, we will discuss the most common and recommended ways to reset or factory restore a Samsung M350 Seek device:
1. Hard Reset using Physical Buttons:
The first and most common method to reset a Samsung M350 Seek device is by performing a hard reset using physical buttons. Follow the steps below:
Step 1: Turn off the camera by holding down the power button until the device shuts down completely.
Step 2: Press and hold the Shutter and Video buttons simultaneously for 10 seconds.
Step 3: Release both buttons, and press and hold the Shutter button again for another 10 seconds.
Step 4: Now press and hold the Menu and Up buttons simultaneously for 10 seconds.
Step 5: Release all the buttons, and press and hold the Menu button again for another 10 seconds.
Step 6: Now press the Shutter button to confirm the reset.
Step 7: The camera will now restart and go to the opening screen. Press and hold the Shutter and Video buttons to enter the firmware update mode.
Step 8: Follow the instructions on the screen to update the firmware to the latest version.
Step 9: Once the firmware update is complete, turn off the camera and wait for 5-10 minutes.
Step 10: Turn on the camera and press and hold the Shutter and Video buttons simultaneously for 10 seconds.
Step 11: Release both buttons, and press and hold the Shutter button again for another 10 seconds.
Step 12: Now press and hold the Menu and Up buttons simultaneously for 10 seconds.
Step 13: Release all the buttons, and press and hold the Menu button again for another 10 seconds.
Step 14: Press the Shutter button to confirm the reset.
Step 15: The camera will now restart and go to the opening screen.
2. Resetting the Camera via the PC:
Another method to reset a Samsung M350 Seek device is by using a PC. Here are the steps to follow:
Step 1: Download and install the Samsung PC Tools software on your PC from the official Samsung website.
Step 2: Connect your camera to your PC using the USB cable.
Step 3: Open the Samsung PC Tools software and select the 'Tools' option from the menu.
Step 4: Now select the 'Connection Settings Manager' option.
Step 5: From the 'Connection Settings Manager' menu, select 'Connection Settings.'
Step 6: Locate and select the 'Digital Camera' option from the list of available items.
Step 7: From the 'Digital Camera Settings' menu, select 'Reset Firmware and Restore settings.'
Step 8: Follow the instructions on the screen to complete the reset process.
Step 9: Disconnect the camera from your PC and wait for 5-10 minutes.
Step 10: Turn on the camera and press and hold the Shutter and Video buttons simultaneously for 10 seconds.
Step 11: Release both buttons, and press and hold the Shutter button again for another 10 seconds.
Step 12: Now press and hold the Menu and Up buttons simultaneously for 10 seconds.
Step 13: Release all the buttons, and press and hold the Menu button again for another 10 seconds.
Step 14: Press the
