How to reset or factory restore Samsung M130 device?
The Samsung M130 device can be reset or factory restored to its original state to fix any software issues or reset any settings that may have been lost or accidentally changed. Here are the most common and recommended methods for resetting a Samsung M130 device:
Method 1: Using the Home button
1. Turn off your device
2. Hold the Home button down for 10 seconds
3. Release the Home button
4. If you see the Samsung logo appear, this indicates that your device is in recovery mode
5. Using the Volume keys, navigate to "Factory data/ Reset phone to defaults"
6. Press the Power button to select this option
7. When you are asked to confirm, select "Yes - delete all user data"
8. Wait for the device to start resetting
9. Your device will start resetting and will reboot to a clean slate
Method 2: Using a computer
1. Connect your device to a computer using a USB cable
2. Make sure to download the correct drivers for your device
3. Launch the Samsung Smart Switch software on your computer and connect your device
4. Select your device from the list
5. Select "Back up to computer"
6. Select "Home screen data" or "Internal memory data," depending on what data you want to backup
7. Follow the prompts to backup your data to the computer
8. Once the backup is complete, disconnect your device from the computer
9. Turn off your device
10. Hold the Power button down for 10 seconds
11. Release the Power button
12. When you see the Samsung logo appear, press and hold the Volume Up button
13. Continue holding the Volume Up button until the Boot menu appears
14. Using the Volume keys, navigate to "Factory data/ Reset phone to defaults"
15. Press the Power button to select this option
16. When you are asked to confirm, select "Yes - delete all user data"
17. Wait for the device to start resetting
18. Your device will start resetting and will reboot to a clean slate
Method 3: Using a recovery tool
1. Make sure that your computer has USB debugging enabled on your Samsung device
2. Download and install the recovery tool software on your computer
3. Connect your device to the computer using a USB cable
4. Launch the recovery tool software on your computer and connect your device
5. Select your device from the list
6. Select "Backup data"
7. Select "Backup everything" or "Backup selected data," depending on what data you want to backup
8. Follow the prompts to backup your data to the computer
9. Once the backup is complete, disconnect your device from the computer
10. Turn off your device
11. Hold the Volume buttons down by pressing the the Power + Volume Up buttons at the same time
12. Release the Power and Volume Up buttons
13. Release the Volume buttons and Press and hold the Power button
14. If you see the Samsung logo appear
15. Once you see the Boot menu, Using the Volume keys, navigate to "Factory data/ Reset phone to defaults"
16. Press the Power button to select this option
17. When you are asked to confirm, select "Yes - delete all user data"
18. Wait for the device to start resetting
19. Your device will start resetting and will reboot to a clean slate.
It's important to note that resetting your device to its factory state will erase all data, so make sure to backup any important information before performing a reset. It is also recommended to only perform a reset if you are unable to fix any software issues or if the device is not functioning properly.
