How to reset or factory restore Samsung Galaxy M01 device?
Resetting or factory restoring a Samsung Galaxy M01 device is a useful skill if you encounter any problems that cannot be resolved using the normal means. Samung Galaxy M01 devices running stock Android have the option to factory reset using the traditional hardware buttons. However, if your device is running on custom ROMs or with altered bootloader, you may need to use alternative methods. Here are the most common and recommended ways to reset Samsung Galaxy M01:
1. Using the butttons:
Press and hold the Volume Up button, the Home button, and the Power button simultaneously for 10 seconds. Release and allow your device to reboot. You may be prompted to enter your PIN or pattern when the device boots up. Continue holding the Volume Up button, the Home button, and the Power button until the Samsung logo appears. You may be prompted to enter your PIN or pattern again. When you see the "Wipe data/factory reset" option, press and hold the Volume Down button until the selection menu appears. Select "Yes -- delete user data" and press and hold the Volume Down button again until the selection menu appears. Select "Delete everything on the phone directly" and press and hold the Volume Down button again until the selection menu appears. Select "Yes -- delete everything on phone directly" and your phone will start the factory reset process. When prompted, select your country's carrier, if applicable.
2. Using a Samsung Smart Switch:
Connect your Samsung Galaxy M01 to your computer using the USB cable, and open the Samsung Smart Switch application on your computer. Select "Backup" on the Samsung Smart Switch application on your computer, and select "Galaxy M01" as your device on the Samsung Smart Switch application. Follow the prompts to backup your data to your computer. After the backup is complete, disconnect your Samsung Galaxy M01 from the computer and restart it. Connect your Samsung Galaxy M01 to your computer using the USB cable, and open the Samsung Smart Switch application on your computer. Select "Restore" from the Samsung Smart Switch application on your computer, and select "Galaxy M01" as your device on Samsung Smart Switch. Follow the prompts to restore your data to your Samsung Galaxy M01.
3. Using OEM Data Flashing Tool:
Spend some time finding a trustworthy flashing tool for your specific device model. Once you have found an OEM data flashing tool, which is a program that is designed to restore your device's firmware and Samsung logo, connect your device to your computer using the USB cable. Make sure that your computer has the proper USB drivers for your device, as advised by Samsung. Your computer may prompt you to allow USB debugging from an unknown source. Go to Settings -> Developer options -> USB debugging, and enable it. Open the flashing tool and select the appropriate MD5 for your firmware model. Once the program identifies your device, select "flash" and follow the prompts to restore your Samsung Galaxy M01 firmware.
These are recommended methods to reset Samsung Galaxy M01 device. Before attempting to reset your device, make sure to back up any important data from your device to avoid losing it.
