How to reset or factory restore Samsung Galaxy J1 mini prime device?
When a Samsung Galaxy J1 mini prime becomes unresponsive, slow, or crashes frequently, it may be necessary to reset or factory restore the device. There are two methods to reset the Samsung Galaxy J1 mini prime: using the Stock Recovery or using the Odin Recovery. In both cases, it is recommended that you create a backup of your device before proceeding with the reset process.
Resetting using Stock Recovery:
Note: This method requires the Samsung USB driver and contemplation that you have to be connected to the computer via USB cable while the backup process is ongoing.
1. Download and connect your device to your computer using the USB cable.
2. Open and run the Samsung Smart Switch PC software on your computer.
3. Select the "Backup" option and then click on "Start."
4. Choose to backup all data or specific data, then click "Next" and select the backup type you prefer.
5. Choose the data to back up and then click "Next." If you have selected all data, the backing up process will automatically start.
6. Wait for the backup to complete and then click "Finish" to stop the process.
7. Disconnect your device from the computer.
8. Turn off your device and then press and hold the "Home" and "Power" buttons simultaneously until you see the Samsung logo on your screen.
9. Release the buttons and wait for the device to restart. Once the device has restarted, you will see the "Get started" screen.
10. Connect your device to the computer using the USB cable and select "Use USB for other functions" on your device.
11. Open the "Backup and restore" section on your device and click on "Restore from a computer."
12. Select "Backup data with Smart Switch on your computer" from the list and click on "Next."
13. Select the backup data you created at step 3 and click "Start."
14. Wait for the restoration process to complete and then click "Finish."
15. Disconnect your device from the computer, reset it to its factory settings and then start using your device as usual.
Resetting using Odin Recovery:
Note: This method requires the Samsung USB driver and Odin Recovery (which can be downloaded from the internet). When using Odin Recovery, there is a risk of bricking your device if done incorrectly. Therefore, it is recommended that you are experienced with putting your device in recovery mode and subsequent steps.
1. Download and connect your device to your computer using the USB cable.
2. Download and install the Samsung USB driver on your computer.
3. Download and install Odin Recovery on your computer.
4. Place your device in recovery mode by pressing and holding the "Home" and "Power" buttons simultaneously until you see the Samsung logo on your screen.
5. Release the buttons and wait for the device to restart. Once the device has restarted, you will see the "Get started" screen.
6. Connect your device to the computer using the USB cable and select "Use USB for other functions" on your device.
7. Start Odin Recovery on your computer by running it from the start menu.
8. Click on the "PDA" button and select the required firmware for your device.
9. Click on the "START" button to begin the firmware update.
10. Wait for the update process to complete and then click "EXIT" to exit Odin Recovery.
11. Disconnect your device from the computer, reset it to its factory settings, and then start using your device as usual.
It is important to note that these methods should be performed with precaution and care. It is also recommended that you seek advice from a professional before attempting to reset or factory restore your device.
