How to reset or factory restore Samsung E3210 device?
The Samsung E3210 is a 3G capable mobile phone belonging to the Samsung Galaxy Y family, released in 2010. Though it has a touch screen interface, it does not have everything modern smartphones have today, but still, restoring the device to its factory state can be useful if you wish to sell it, or if it's malfunctioning, having issues, or you want to start fresh. The usual process to reset or factory restore a phone involves seizing the backup of all important data beforehand, except for contacts as they can be restored from your Google account. Here are the two common methods to reset your Samsung E3210 device.
1. Using Hard Reset/Factory Data Reset
A hard reset or factory data reset will erase all settings, applications, and data installed on the device. It will restore the phone to its original state, which means you won't be able to recover your previous data. It's recommended to only perform a hard reset if you are absolutely sure you want to erase all data. You may also want to back up your data ahead of time.
Before hard resetting your Samsung E3210, make sure your phone is fully charged. Here's how to hard reset your phone:
- Turn off the phone completely.
- Press and hold the Power button until the Samsung logo appears.
- Release the Power button and press and hold the Home button and the Power button simultaneously for about 15 seconds.
- Release the Power button, but keep holding the Home button.
- While still holding the Home button, press and hold the Volume Up button until the Samsung logo appears again.
- Release the Home button and press and hold the Volume Up button and the Power button simultaneously for about 5 seconds.
- Release the Power button, but keep holding the Volume Up button.
- While still holding the Volume Up button, press and hold the Power button and the Home button simultaneously for about 30 seconds.
- Release the Power and the Home buttons, but keep holding the Volume Up button.
- When the Android logo appears, press and hold the Volume Down button, the Power button, and the Home button for 30 seconds.
- Release all the buttons and your phone will reboot in Recovery Mode.
2. Using the Personal Computer and the Android SDK tool
Using the Samsung Personal Computer software and the Android SDK tool, you can restore the device to its factory state. This method will erase all data on the device and restore it to its original settings. Ensure that your computer is running on the same operating system as your phone .
Here's how to restore your Samsung E3210 device using a Personal Computer:
- Enable USB debugging on your Android device. To do this, navigate to the Settings page, then to Applications, then to Development, and then to USB debugging. Select "USB debugging" and make sure that the box next to "Allow USB debugging from this computer" is checked.
- Connect your Samsung E3210 device to the Personal Computer via a USB cable.
- Run the Samsung Personal Computer Application on the computer and select Android SDK Platform tools.
- Locate and right-click on the Samsung E3210 device drivers. Select "Properties" and then select "Power Management". Make sure that "Allow this device to wake the computer" is checked.
- Select Start > Run and type "cmd" in the Run prompt and then press Enter.
- Type the following command and press "Enter" after each command:
For 64-bit System:
`adb devices`
`adb reboot recovery`
`adb push firmware /sdcard/firmware.zip`
`adb reboot bootloader`
` fastboot flash recovery /sdcard/recovery.img`
`fastboot reboot recovery`
`adb install firmware.zip`
For 32-bit System:
`adb devices`
`adb reboot recovery`
`adb push firmware /sdcard/firmware.zip`
`adb reboot bootloader`
`fastboot flash recovery /sdcard/recovery.img`
`fastboot reboot recovery`
`adb install firmware.zip`
- Reboot your phone in Recovery Mode.
- Navigate to the phone's recovery mode, then select "Wipe data/factory reset".
- Select "Yes, delete all user data" and
