Samsung D710

Home/ Samsung/ Phones/ D710

Table of Contents

Summary

Samsung D710 Price

The retail price of a new or used/second hand Samsung D710 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Samsung D710 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of the Samsung D710?

The battery life of the Samsung D710 is up to 4 hours of talk time and up to 200 hours of standby time.

What type of display does the Samsung D710 have?

The Samsung D710 has a 2.2 inch TFT LCD display with a resolution of 240 x 320 pixels.

How to reset or factory restore Samsung D710 device?

There are several ways to reset or factory restore a Samsung D710 device. However, the most common and recommended method is to use the hardware reset button. Here are the steps to reset the Samsung D710 device using the hardware reset button: 1. Turn off the device by holding the Power button down for 10 seconds until the device shuts down completely. 2. Press and hold the Power button, Volume Up button, and Home button on the device simultaneously for about 10 seconds. 3. Release all buttons when you see the Samsung logo on the screen. 4. Use the Volume Up button to navigate through the options until you reach "Wipe data/factory data". 5. Press the Power button to select "Yes, delete all user data". 6. Wait for the device to reset. This can take several minutes, so be patient. 7. Once the device has reset, you will see a message on the screen asking you to set up the device as new. Follow the prompts to complete the setup process. Another method to reset the Samsung D710 device is to use the Samsung Smart Switch application. This method requires a computer and a USB cable. Here are the steps to reset the Samsung D710 device using Smart Switch: 1. Connect the device to the computer using a USB cable. 2. Open Samsung Smart Switch on the computer. 3. Click on the "Start" button and select "Backup & Restore." 4. Select "Restore fromClipboard" and then select "Data." 5. Copy the backup data to the clipboard by clicking on "Copy." 6. Paste the backup data into the application by clicking on "Paste." 7. Select "Re voice and data only" and then click on "Restore." 8. Wait for the device to reset. Once the restore process is complete, the device will restart and you will be asked to set it up as new. It's important to note that using a software reset will erase all data on the device, including contacts, messages, and files. Therefore, it's recommended to only use a reset when all other methods have failed and you are unable to restore the device through other means. It's also important to make sure you have a backup of all important data before performing a reset.