Samsung C450

Home/ Samsung/ Phones/ C450

Table of Contents

Summary

Samsung C450 Price

The retail price of a new or used/second hand Samsung C450 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Samsung C450 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore Samsung C450 device?

The Samsung C450 is an older Samsung device, and though it may no longer be supported by Samsung, you can still perform a hard reset or factory restore to either clear everything on your device and start fresh or reset your device to its original settings. Here are two methods of resetting a Samsung C450 device: Method 1: Using recovery mode 1. Charge your device until the battery is at least 50%. You can check the battery level by going to Settings > Power. 2. Turn off your device by holding down the power button and removing the battery (if possible). If your device cannot remove the battery, you may need to connect it to a charger and allow the battery to drain. 3. Press and hold the Volume Up button + the Home button + the Power button simultaneously for about 10 seconds until you see the Samsung logo appear. If your device has a physical home button, you may need to press and hold the Volume Up button for about 5-10 seconds until you see the Home button, and then press and hold the Home and Power buttons. 4. Release the buttons when you see the Samsung logo. 5. Select the "Reboot System Now" option and wait for the device to start up. 6. Once your device has restarted, go to the . 7. Tap "Factory Data Reset". 8. Tap "Yes - Delete all spring back data". 9. Wait for the reset process to complete. 10. Once the device is finished resetting, it will automatically take you to the home screen. You can now reset your device to its original settings and start fresh. Method 2: Using the "Odin3" software This method requires a computer and a Samsung Odin3 software downloaded from the internet. Here are the steps to reset your Samsung C450 device using Odin3: 1. Make sure your device is connected to the computer using a cable. 2. Make sure the computer is turned on and has the Samsung Odin3 software installed. 3. Open Odin3 and make sure you select the correct model of Samsung C450 device. 4. Click on the "PDA" button and select the firmware file from your computer's file browser. 5. Click on the "Start" button to begin the reset process. 6. Once the reset process is complete, your device will automatically take you to the home screen. You can now reset your device to its original settings and start fresh. Note: Please be careful when using this method as it could damage your device's hardware, thus on resetting your device, you should be aware that all data will be erased and you would not be able to access any of it.