How to reset or factory restore Sagem my401X device?
To reset or factory restore a Sagem my401X device, you can follow the steps below:
Method 1: Using a USB cable and PC:
1. Connect the Sagem my401X device to your PC using a USB cable.
2. Open the Notepad or Command Prompt on your PC.
3. Type the command "ATZ" and press Enter on your PC.
4. The device will respond with an OK message.
5. Type the command "ATE0" and press Enter on your PC.
6. The device will respond with an OK message.
7. Disconnect the Sagem my401X device from your PC.
8. Press and hold the "3" key on your device until the LED light starts flashing rapidly.
9. Release the "3" key and wait for the device to boot up.
10. The device will now be reset to its factory settings.
Method 2: Using a pinhead and Internet connectivity:
1. Connect the Sagem my401X device to the internet.
2. Open your web browser and navigate to the Sagem website (https://www.sagem.com/en-us).
3. Look for the "Support" or "Products" section on the website and find the "Downloads" section.
4. Download the firmware file for your device from the "Downloads" section.
5. Extract the firmware file to your desktop.
6. Connect a pinhead to the Sagem my401X device by inserting it into the "Reset" or "Configuration" pin.
7. Press the "config" or "reset" button on the device until the LED light starts flashing rapidly.
8. Release the "config" or "reset" button.
9. Press the "01" key on the device followed by the "0" key and hold them down for a few seconds.
10. Release the keys and then press the "Command" key followed by the "0" key and hold them down for a few seconds.
11. Release the keys and press the "Firmware" key.
12. Select the firmware file you downloaded earlier by using the arrow keys and press the "OK" key.
13. The device will now boot up with the latest firmware installed.
Note: Resetting or factory restoring your device will erase all settings, contacts, and data. Please make sure to backup all important data before proceeding. Also, be aware that resetting your device may void your warranty.
What is the battery life of the Sagem my401X?
The battery life of the Sagem my401X is up to 5 hours of talk time and up to 200 hours of standby time.
How do I reset the Sagem my401X?
To reset the Sagem my401X, press and hold the power button for 10 seconds.
What type of SIM card does the Sagem my401X use?
The Sagem my401X uses a mini-SIM card.
