How to reset or factory restore Sagem MY C-5w device?
The Sagem MY C-5w device can be reset to its factory settings in one of two ways: through the web interface or using the RESET button. Both methods are recommended by Sagem.
However, before resetting the device, make sure to backup any important data and user settings as they will be lost during the reset process.
Web Interface:
1. Connect your device to the internet using an Ethernet cable or Wi-Fi.
2. Open your web browser and enter the IP address of your device (usually 192.168.1.1) into the address bar.
3. Log in to your device using the default username (admin) and password (password).
4. Click on the factory reset option, which is usually located under the maintenance section of the settings menu.
5. Confirm the reset process by clicking on the reset button.
6. Wait for the device to reset to its factory settings. This process may take several minutes.
7. Once the reset is complete, the device will restart and you may be prompted to set it up as a new device with default settings.
RESET Button:
1. Connect your device to the internet using an Ethernet cable or Wi-Fi.
2. Press and hold the RESET button (usually located at the back of the device) for 15 seconds until the landing page appears.
3. Click on the factory reset option, which is usually located under the main menu section of the settings menu.
4. Confirm the reset process by clicking on the reset button.
5. Wait for the device to reset to its factory settings. This process may take several minutes.
6. Once the reset is complete, the device will restart and you may be prompted to set it up as a new device with default settings.
It is important to note that the reset button method may require the device to be connected to an active internet connection to function properly, while the web interface method may not. Additionally, both methods will erase all data and user settings on the device, so be sure to backup important information before attempting a reset.
