How to reset or factory restore Sagem MW 3052 device?
The Sagem MW 3052 is a PFSense/Firewall appliance that runs on FreeBSD. If you need to reset or factory restore a Sagem MW 3052, follow these steps:
Step 1: Power on the Sagem MW 3052 device.
Step 2: Press and hold the Up/Down power buttons on the front of the device.
Step 3: Record the exact sequence of beeps that appear on the device's console. This sequence is specific to the Sagem MW 3052 and helps you identify the problem with the device.
Step 4: Release the up/down buttons and enter Boot Mode by pressing the Boot button on the front of the device.
Step 5: If the Boot Mode is enabled, you will see a menu prompt "Enter password to unlock Boot Mode." Assign a password to the Boot Mode and unlock it.
Step 6: Once you have unlocked Boot Mode, select the "Restore Factory Defaults" option from the menu.
Step 7: Enter "root" when prompted to enter the user name.
Step 8: Enter "factory-default" when prompted to enter the factory defaults password. The factory default password is "1234". If the password does not match, enter a different password and try again.
Step 9: Wait for the device to reset to its factory settings. This process can take a few minutes.
Step 10: Once the device has reset, press the reset button at the back of the device to reboot the system.
Step 11: Wait for the device to boot up completely. This process can take up to a few minutes.
Step 12: Login to the Sagem MW 3052 device using the default username "root" and default password "1234".
Congratulations, you have successfully reset your Sagem MW 3052 device to its factory settings. Note that your device will not retain any of the original configurations or settings.
