Realme Watch S

Home/ Realme/ Phones/ Watch S

Table of Contents

Summary

Realme Watch S Price

At the time of it's release in 2020, November 14, the manufacturer's retail price for a new Realme Watch S was about 80 EUR.

The retail price of a new or used/second hand Realme Watch S varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Realme Watch S across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What type of display does the Realme Watch S have?

The Realme Watch S has a 1.3-inch LCD display with a resolution of 320 x 320 pixels.

What is the battery capacity of the Realme Watch S?

The Realme Watch S has a 390mAh battery capacity.

How to reset or factory restore Realme Watch S device?

Sure, I can provide you with the most common and recommended ways to reset or factory restore a Realme Watch S device. Here are the steps to follow: 1. Connect the Realme Watch S device to your computer using a USB cable. 2. Install the realme link app on your computer and connect it to your smartwatch. 3. Open the realme link app and go to the settings menu. 4. Scroll down and click on "System". 5. Click on "Reset All Data/Factory Data Reset" to start the process. 6. You will be prompted to confirm the reset. Click on "Yes" to proceed. 7. Wait for the reset process to complete. This may take some time depending on the speed of your computer. 8. Once the reset is complete, you will be prompted to set up your smartwatch as a new device. Note: Restoring your Realme Watch S to its factory settings will erase all data and settings on your device. Make sure to back up any important data before proceeding with this process. Alternatively, you can also reset your Realme Watch S device by following these steps: 1. Press and hold the power button (located on the side of the watch) for 10 seconds. 2. Release the power button and then press and hold the volume button (located at the bottom of the watch) for 10 seconds. 3. Release both buttons and wait for the watch to enter the recovery mode. 4. Once in recovery mode, use the volume button to navigate through the options and select "Wipe data/factory reset". 5. Confirm the reset and wait for the process to complete. 6. Once the reset is complete, you will be prompted to set up your smartwatch as a new device. Again, restoring your Realme Watch S to its factory settings will erase all data and settings on your device. Make sure to back up any important data before proceeding with this process.

What type of sensors does the Realme Watch S have?

The Realme Watch S has an accelerometer, gyroscope, heart rate sensor, and blood oxygen sensor.

Specifications

Network

Technology: No cellular connectivity
2G bands: N/A
3G bands: N/A
4G bands: N/A
Speed: No
GPRS: No
EDGE: No

Launch

Announced: 2020, November 03
Status: Available. Released 2020, November 14

Body

Dimensions: 47 x 47 x 12 mm (1.85 x 1.85 x 0.47 in)
Weight: 48 g (1.69 oz)
Build: Glass front, aluminum frame, plastic back
SIM: No
: IP68 dust/water resistant (up to 1.5m) Compatible with standard 22mm straps