How to reset or factory restore Realme Narzo 60 device?
To reset or factory restart a Realme Narzo 60 device, follow these steps:
Method 1: Using recovery mode
1. Press and hold the Volume Down button and the Power button at the same time for at least 10 seconds.
2. Release both buttons when you see the Realme logo, then press and hold the Volume Down button again.
3. Release the Volume Down button when you see Recovery mode on the screen.
4. Connect your device to a charger and wait for the battery to charge to at least 30%.
5. In Recovery mode, go to Settings and then About phone.
6. Scroll down to the Build number section and tap it.
7. Enter the OEM code (specific to Realme Narzo 60). This code can be found in the box or may be available online.
8. Once you enter the correct OEM code, tap OK.
9. Reboot your device from recovery mode.
Method 2: Using physical button combination
1. Press and hold the Volume Up button, the Power button, and the Volume Down button simultaneously for 10 seconds.
2. Release all buttons and press and hold the Volume Up button again and then press and hold the Power button.
3. Press and hold the Volume Down button for 10 seconds.
4. Release all buttons and press and hold the Volume Up button again, then press and hold the Power button.
5. Wait for the device to boot into Recovery mode.
6. Connect your device to a charger and wait for the battery to charge to at least 30%.
7. In Recovery mode, go to Settings and then About phone.
8. Scroll down to the Build number section and tap it.
9. Enter the OEM code (specific to Realme Narzo 60). This code can be found in the box or may be available online.
10. Once you enter the correct OEM code, tap OK.
11. Reboot your device from recovery mode.
Method 3: Using recovery mode in fastboot
1. Connect your device to a computer using a USB cable.
2. Open a command prompt or terminal window on your computer and enter the fastboot command: fastboot devices
3. Verify that your device is recognized by the computer.
4. Enter the fastboot command: fastboot -i firmware.xml recovery
5. Enter the password for recovery mode (if set).
6. In Recovery mode, go to Settings and then About phone.
7. Scroll down to the Build number section and tap it.
8. Enter the OEM code (specific to Realme Narzo 60). This code can be found in the box or may be available online.
9. Once you enter the correct OEM code, tap OK.
10. Reboot your device from recovery mode.
Method 4: Using firmware or stock file
1. Download the firmware or stock file for Realme Narzo 60 from official Realme website or a trusted forum.
2. Connect your device to a computer using a USB cable.
3. Open a command prompt or terminal window on your computer and enter the fastboot command: fastboot -i firmware.xml recovery
4. In Recovery mode, go to Settings and then About phone.
5. Scroll down to the Build number section and tap it.
6. Enter the OEM code (specific to Realme Narzo 60). This code can be found in the box or may be available online.
7. Once you enter the correct OEM code, tap OK.
8. Reboot your device from recovery mode.
Note: It's important to note that restoring a Android device to its factory state will erase all data and settings. Be sure to back up any important information before proceeding with the reset or factory restore process. It's also recommended that you only perform a factory reset when needed, as it can void your device's warranty.
