What are the features of Realme 10?
Realme 10 features a 6.5-inch HD+ display, a MediaTek Helio G35 processor, a 5,000mAh battery, and a 13MP + 2MP dual rear camera setup.
How to reset or factory restore Realme 10 device?
Realme 10 is a smartphone device that allows users to perform a reset or factory restore to restore the device to its original state. This process can be performed in case of a malfunctioning device, wrong app installation, or a system problem. There are several methods available to reset or factory restore a Realme 10 device, and this guide will discuss the most common and recommended ways to do so.
Method 1: Using the Physical Volume Up and Down buttons
To reset a Realme 10 device using the physical volume up and down buttons, follow these steps:
1. Turn off the device by pressing and holding the power button until the device shuts down.
2. Press and hold the volume up button and the power button simultaneously for about 10-15 seconds until the recovery mode is enabled.
3. Release both buttons, and the device will enter the bootloader mode.
4. Connect the device to the computer using the appropriate USB cable.
5. Open a utility such as Spreadsheet on Windows or Terminal on macOS.
6. Run the command "fastboot devices" to ensure the device is detected.
7. Enter the following command to flash the stock firmware: "fastboot flash recovery /path/to/stock/recovery/image"
8. Reboot the device using the power button.
Method 2: Using Recovery Mode
To reset a Realme 10 device using the recovery mode, follow these steps:
1. Turn off the device by pressing and holding the power button until the device shuts down.
2. Press and hold the volume up button and the power button simultaneously for about 10-15 seconds until the recovery mode is enabled.
3. Release both buttons, and the device will enter the recovery mode.
4. Select "Wipe data/factory reset" using the volume buttons.
5. Confirm the reset by selecting "Yes – delete all user data."
6. Wait for the reset to complete, which may take several minutes.
7. Reboot the device using the power button.
Method 3: Using the Reset Function in Settings
To reset a Realme 10 device using the reset function in settings, follow these steps:
1. Open the settings app on the device.
2. Scroll down to the bottom of the screen and select "About Phone."
3. Scroll down to the bottom of the screen and select "System Updates."
4. Press and hold the volume up button and the power button simultaneously for about 10-15 seconds until the recovery mode is enabled.
5. Release both buttons, and the device will enter the recovery mode.
6. Select "Wipe data/factory reset" using the volume buttons.
7. Confirm the reset by selecting "Yes – delete all user data."
8. Wait for the reset to complete, which may take several minutes.
9. Reboot the device using the power button.
In conclusion, these are the most common and recommended ways to reset or factory restore a Realme 10 device. Before performing any reset or factory restore, it's essential to back up all important data to avoid losing it permanently.
