QMobile Noir V4

Home/ QMobile/ Phones/ Noir V4

Table of Contents

Summary

QMobile Noir V4 Price

At the time of it's release in 2014, January, the manufacturer's retail price for a new QMobile Noir V4 was about 180 EUR.

The retail price of a new or used/second hand QMobile Noir V4 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of QMobile Noir V4 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of QMobile Noir V4?

The battery capacity of QMobile Noir V4 is 2000 mAh

How to reset or factory restore QMobile Noir V4 device?

To reset or factory restore a QMobile Noir V4 device, there are several ways: **Option 1: Boot into recovery mode** 1. Turn off your QMobile Noir V4 device. 2. Press and hold the power button and the volume down button simultaneously for 10 seconds. This will boot the device into recovery mode. 3. Use the volume buttons to navigate to "Wipe data/factory reset" and press the power button to select it. 4. Use the volume buttons to navigate to "Yes – delete all user data" and press the power button to select it. 5. The device will start resetting and it may take a few minutes. Once the reset is complete, the device will reboot. **Option 2: Boot into fastboot mode** 1. Connect your QMobile Noir V4 device to your computer using a USB cable. 2. Open a command prompt on your computer and enter the following command to boot your device into fastboot mode: `fastboot reboot bootloader` 3. Once the device is in fastboot mode, enter the following command to reset the device to its factory settings: `fastboot erase` 4. Confirm the reset by entering "Yes" when prompted. 5. Wait for the device to reset. Once the reset is complete, the device will reboot into recovery mode. Once it is safe to do so, close the recovery mode by selecting "Reboot system now". **Option 3: Boot into recovery mode using ADB** 1. Connect your QMobile Noir V4 device to your computer using a USB cable. 2. Open a command prompt on your computer and navigate to the folder where ADB is installed. 3. Enter the following command to enter recovery mode: `adb reboot recovery` 4. Once the device is in recovery mode, select "Wipe data/factory reset" and confirm the reset by selecting "Yes – delete all user data". 5. Wait for the device to reset. Once the reset is complete, reboot the device and continue with the steps to set up the device. It is important to note that resetting the device to its factory settings will erase all user data and personal settings on the device. Before resetting the device, make sure to back up any important data and information.