How to reset or factory restore QMobile Noir LT700 Pro device?
The QMobile Noir LT700 Pro has several options for resetting or factory restoring the device to its original state. However, we highly recommend against using this option unless absolutely necessary, as it will erase all data and settings on the device. Here are the common and recommended ways to reset or factory restore a QMobile Noir LT700 Pro device:
Method 1: Using Hardware Buttons
1. Turn off the device by pressing and holding the power button until it shuts down.
2. Press and hold the power button, home button, and volume up button simultaneously until the screen goes blank.
3. Release the volume up button, but keep pressing the power and home buttons.
4. Wait for the device to boot into recovery mode.
5. In recovery mode, select “Wipe data/factory reset” and confirm the action.
6. Wait for the device to reset, which may take several minutes.
7. Once the reset is complete, press the volume down button until the “Reboot system now” option appears, then press the power button to reboot the device.
Method 2: Using PC
1. Connect the device to your computer using a USB cable.
2. Install the QMobile PC Suite on your computer.
3. Launch the PC Suite and select your device from the list.
4. Click on the “Backup” tab and select “Backup all user data”.
5. Confirm the backup and wait for it to complete.
6. Disconnect the device from your computer.
7. Turn off the device and press and hold the power button, home button, and volume up button simultaneously until the screen goes blank.
8. Release the volume up button, but keep pressing the power and home buttons.
9. Wait for the device to boot into recovery mode.
10. In recovery mode, select “Wipe data/factory reset” and confirm the action.
11. Wait for the device to reset, which may take several minutes.
12. Once the reset is complete, press the volume down button until the “Reboot system now” option appears, then press the power button to reboot the device.
13. Once the device boots up, connect it to your computer again and launch the PC Suite.
14. Select your device from the list and click on the “Restore” tab.
15. Select the backup file you created in step 5 and restore the device.
Method 3: Using QFlash Tool
1. Download and install the QFlash Tool on your computer.
2. Connect the device to your computer using a USB cable.
3. Launch the QFlash Tool and select your device from the list.
4. Click on the “Flash Firmware” tab and select the firmware file for your device.
5. Click on the “Start” button to flash the firmware.
6. Wait for the firmware to flash, which may take several minutes.
7. Once the firmware has been flashed, disconnect the device from your computer.
8. Turn off the device and press and hold the power button, home button, and volume up button simultaneously until the screen goes blank.
9. Release the volume up button, but keep pressing the power and home buttons.
10. Wait for the device to boot into recovery mode.
11. In recovery mode, select “Wipe data/factory reset” and confirm the action.
12. Wait for the device to reset, which may take several minutes.
13. Once the reset is complete, press the volume down button until the “Reboot system now” option appears, then press the power button to reboot the device.
Note: Using these methods to reset or factory restore your QMobile Noir LT700 Pro device may erase all data and settings. Therefore, we highly recommend using these methods only as a last resort and make sure to backup your important data before proceeding. Additionally, these methods should only be used if you are unable to restore the device from your PC Suite or backup file.
