QMobile Noir A15 3D

Home/ QMobile/ Phones/ Noir A15 3D

Table of Contents

Summary

QMobile Noir A15 3D Price

At the time of it's release in 2013, July, the manufacturer's retail price for a new QMobile Noir A15 3D was about 150 EUR.

The retail price of a new or used/second hand QMobile Noir A15 3D varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of QMobile Noir A15 3D across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of QMobile Noir A15 3D?

The battery capacity of QMobile Noir A15 3D is 2000 mAh

What is the display size of QMobile Noir A15 3D?

The display size of QMobile Noir A15 3D is 5.0 inches

How to reset or factory restore QMobile Noir A15 3D device?

Sure, here are the most common and recommended ways to reset or factory restore a QMobile Noir A15 3D device: 1. Battery Backup: One of the easiest and most common ways to reset your QMobile Noir A15 3D is to perform a hard reset using the power button + volume up button. This will drain the device's battery completely, and once the phone is on, you will see the QMobile logo. Press the power button until you reach the "Recovery" screen. Here, select "Wipe data/factory data" and press Yes to confirm. Your device will start rebooting, and after a few minutes, it will start again. 2. Backup: If you want to keep your data in case you need to restore it later, you can back up your data to your computer or another device using a USB cable or Wi-Fi. Then, you can perform a hard reset primary service code. To access your device from the recovery mode, switch off your device, then use the power button + the volume up button to enter recovery mode. It will prompt you to enter your primary service code. Once you have entered the correct PSC, you can select "Wipe data/factory data" and press Yes to confirm. 3. Custom Recovery: If you want to restore your device to the stock firmware, you can download the stock ROM files and flash them to your device using a custom recovery. To flash your device to the stock firmware, connect the device to your computer and ensure USB debugging is enabled. Then, open a custom recovery and select the stock ROM files. You will be presented with a final confirmation prompt. If you select yes, your device will start rebooting into the stock firmware. Usually, it is recommended to perform a hard reset or unlock bootloader of your device if you are trying to sell your QMobile Noir A15 3D device. However, these steps should only be attempted if you are familiar with the risks and cannot recover any data on your device. Remember to always backup your data twice before proceeding with any of these steps.