How to reset or factory restore QMobile Energy X2 device?
QMobile Energy X2 is a smartphone that runs on Android operating system. It is important to note that before resetting or factory restoring the device, it is important to make sure your data is backed up safely. Here are the most common and recommended ways to reset or factory restore a QMobile Energy X2 device:
Method 1: Using the built-in reset option
1. Turn off the device completely.
2. Press and hold the power button and the volume up button together for a few seconds.
3. Release both buttons, and wait for the QMobile logo to appear on the screen.
4. Touch the logo and press and hold the volume up button to move to the 'reset' option.
5. Press the volume up button to select the 'yes--delete all user data' option.
6. Wait for the device to reset. This could take a few minutes.
7. When the device restarts, go to the settings and enable "OEM unlocking".
8. After that, go to settings again and tap "About Phone", there you will see a "Build Number" tap on it several times until you see a message "You are now a developer!"
9. Go back to "Settings", then "Developer options" and enable "USB debugging".
10. Connect your device to your computer and open Android Device Manager.
11. Select your device from the list, and then click on the "Flash recovery" button.
12. In recovery mode, select "Install) and choose the ROM package you downloaded earlier.
13. Swipe to install and then wait for the installation to complete.
14. Restart the device and you should see the QMobile logo on the screen.
Method 2: Using a custom recovery
1. Download a custom recovery image such as TWRP or SuperSU.
2. Turn off the device completely.
3. Press and hold the power button and the volume down button together for a few seconds.
4. Release both buttons and wait for the recovery logo to appear on the screen.
5. Inside the recovery mode, go to the "Wipe data" option and select "Yes - delete all user data".
6. Reboot the device and go to the settings.
7. Enable "OEM unlocking".
8. And then go to the settings again and tap "About Phone", there you will see a "Build Number" tap on it several times until you see a message "You are now a developer!"
9. Go back to "Settings", then "Developer options" and enable "USB debugging".
10. Connect your device to your computer and open Android Device Manager.
11. Select your device from the list, and then click on the "Flash recovery" button.
12. In recovery mode, select "Install" and choose the ROM package you downloaded earlier.
13. Swipe to install and then wait for the installation to complete.
14. Reboot the device and you should see the QMobile logo on the screen.
Method 3: Using Android Data Recovery software
1. Download and install Android Data Recovery software.
2. Open the software and connect your device to your computer.
3. Select your device from the list and then click on "Start recovery".
4. In recovery mode, select "Wipe data" and select "Yes - delete all user data".
5. Restart your device and go to the settings.
6. Enable "OEM unlocking".
7. And then go to the settings again and tap "About Phone", there you will see a "Build Number" tap on it several times until you see a message "You are now a developer!"
8. Go back to "Settings", then "Developer options" and enable "USB debugging".
9. Connect your device to your computer and open Android Device Manager.
10. Select your device from the list, and then click on the "Flash recovery" button.
11. In recovery mode, select "Install" and choose the ROM package you downloaded earlier.
12. Swipe to install and then wait for the installation to complete.
13. Reboot the device and you should see the QMobile logo on the screen.
It's important to note that before restoring your QMobile Energy X2 to its stock state, make sure to take a backup of any important data, as you will lose all user data during the process. Additionally, these methods may void your device's warranty, so use them at your own risk.
