How to reset or factory restore Prestigio MultiPhone 5508 Duo device?
Sure, here are the most common and recommended ways to reset or factory restore a Prestigio MultiPhone 5508 Duo device:
Method 1: Using the Volume Down and Power Buttons
1. Turn off the device by pressing the Power button.
2. Press and hold the Volume Down button while also pressing the Power button.
3. Release the buttons when the device starts to vibrate.
4. Press the Volume Up button until "Recovery mode" is displayed on the screen.
5. Press the Volume Up button again to enter the recovery menu.
6. Use the Volume buttons to navigate to the "Wipe data/factory data reset" option.
7. Press the Power button to select "Yes --- Delete all user data".
8. Wait for the device to reset. This may take several minutes.
Method 2: Using a Computer and USB Cable
1. Connect the device to the computer using a USB cable.
2. Install the Prestigio MultiPhone 5508 Duo drivers on the computer if they are not already installed.
3. Open the device manager on the computer and locate the device.
4. Right-click on the device and select "Properties".
5. Select "Backup device" to create a backup of the device.
6. Then, right-click on the "Driver" tab and select "Uninstall".
7. After uninstalling the device driver, right-click on the device and select "Restore Point".
8. Select the backup point created in step 5 and select "Restore".
9. Wait for the device to reset. This may take several minutes.
Method 3: Using the Bootloader Modes
1. Connect the device to the computer using a USB cable and abide by the following steps,
- Rule 1: Insert the USB port of any other Smartphone into your computer, ensuring the computer recognize it.
- Rule 2: Make sure your device is in bootloader mode, you do this by switching off the device and for about 9 seconds hold the "Volume down" key, while also pressing the "Power" key.
- Rule 3: Once your device is in bootloader mode, press the "Volume down" key continuously until you are presented with various options on the screen.
- Rule 4: Select the "Manufacturer options" or as it's commonly known "MTP" option
- Rule 5: Once you are in manufacturer options, select "UFS Default Connection" or "UFS (Chinese)" Option which may vary depending on your device.
- Rule 6: Once you have selected "UFS (Chinese)" Options, press "Volume up" key until "Prekio
