How to reset or factory restore Prestigio Multipad 4 Quantum 10.1 device?
Sure! It's always a good idea to reset a device if it's slowing down, acting oddly, or if you want to start fresh and personalize everything from scratch. Here are the most common and recommended ways to reset or factory restore a Prestigio Multipad 4 Quantum 10.1 device:
Method 1: Resetting to Factory Settings
1. Press and hold the Volume Up and Power buttons together for about 10 seconds, until the phone enters recovery mode. You may need to press and release the Volume buttons and the Power button a few times until the screen goes blank for a few seconds and then turns back on.
2. Once the phone is in recovery mode, scroll down to "Wipe Data/Factory Reset" and select it.
3. Confirm the action by selecting "Yes—Delete all user data."
4. Wait for the phone to reset the data. This could take a few minutes, so be patient.
5. Once the phone has reset the data, restart it by repressing the Power button.
Method 2: Using the Android Settings Menu
1. Open the Settings menu by swiping down the notification bar or by tapping the Apps icon in the lower-right corner of the home screen.
2. Tap on "Backup and Reset."
3. Scroll down to "Factory data reset" and select it.
4. Confirm the action by selecting "Yes—Delete all user data."
5. Wait for the phone to reset the data. This could take a few minutes, so be patient.
6. Once the phone has reset the data, restart it by repressing the Power button.
Method 3: Using a Computer with a USB Cable
1. Connect the phone to a computer using a USB cable.
2. Open the Prestigio Multipad 4 Quantum 10.1 manufacturer website.
3. Download the latest version of Prestigio Multipad 4 Quantum firmware and backup apps.
4. Unplug the phone from the computer and turn off the phone.
5. Press and hold the Volume Up and Power buttons together for about 10 seconds, until the phone enters recovery mode. You may need to press and release the Volume buttons and the Power button a few times until the screen goes blank for a few seconds and then turns back on.
6. Once the phone is in recovery mode, scroll down to "Install from SD card" and select it.
7. Press the Volume Up button to select the firmware file from your external SD card.
8. Press the Power button to confirm the selection.
9. Wait for the phone to install the firmware updates. This could take a few minutes, so be patient.
10. Once the phone has installed the firmware updates, restart it by repressing the Power button.
11. If fails to boot, then you might want to avoid this factory reset method.
Please note that resetting a device to factory settings will erase all data, including contacts, apps, and data stored locally. Make sure to back up your data before attempting a reset, especially if you have important files or information that you do not want to lose.
